Asko D3331 사용 및 관리 매뉴얼 - 페이지 7

{카테고리_이름} Asko D3331에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko D3331 16 페이지. Use & care guide asko d3331 fr
Asko D3331에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), (스페인어) Uso Y Cuidado (16 페이지), (프랑스어) Manuel D'utilisation (16 페이지)

페이지 인쇄

OPERA

OPERATING INSTR

TING INSTRUCTIONS

TING INSTR

OPERA

TING INSTR

THE CONTROL P

THE CONTR

OL P

OL PANEL

OL P

Your ASKO dishwasher has a button-operated control panel, as illustrated below. To select a wash program or option,

simply press the Program button until the indicator light for the desired program comes on, press the desired option

buttons, then press Start/Stop.

Power button (on the top side of the control panel)

PROGRAMS

OGRAMS

To select a program, simply press the program button until the indicator light for the desired program glows. The

programs are described below:

Pots and Pans (170°/Sani or 140° F)

For the heaviest soiled loads, such as casseroles, sauce pans, etc.

Heavy Wash (160° F or 130° F)

For heavily soiled loads, such as pots, pans, casseroles, etc.

Normal Wash (130° F or 140° F)

For normally soiled loads, such as plates, glasses, bowls, and lightly soiled pans.

Delicate Wash (105° F or 120° F)

For delicate items, such as fine china and crystal, that are washed immediately after use.

When using this program, you should set the temperature to low and dry the dishes without

heat.

Quick Wash (85° F or 120° F)

For lightly soiled loads that are washed immediately after use. This program can also be used

for delicate items, but you should set the temperature to low and dry the dishes without heat.

Rinse and Hold

To rinse dishes that you plan to wash later that day.

OPTIONS

To select an option, simply press the appropriate option button. The options are described below.

Temperature

The dishwasher has two temperature options for each wash program, as shown above. When this button is

set on the high temperature, the main wash and final rinse are heated to the higher temperature for the

selected program. If it is set to low, the main wash and final rinses are heated to the lower temperature. The

indicator light will glow only when the higher temperature is selected.

Delayed Start

This button allows you to delay starting the dishwasher from 1 to 12 hours. Press this button until the desired

number of hours displays then press Start. If you change your mind before you press Start, continue to press

this button until the Delay Start indicator light goes off. The indicator light will glow when Delay Start is

selected. To cancel Delay after you press Start, hold down the Start/Stop button for three seconds.

Drying

This option speeds up the drying process by raising the temperature in the final rinse to 160° F to heat the

dishes and tank before the drying cycle begins. The indicator light will glow only when this option is activated.

WER BUTT

POWER BUTT

WER BUTTON

WER BUTT

Use this button to turn the main power to the unit on

and off. Refer to the illustration above to see the

location of the power button.

UCTIONS

ANEL

Program

Program indicator lights

button

Display

window

"The Normal Wash program is used

for energy testing and should be

used for normal or lightly soiled

loads. When washing dishes that

are more heavily soiled, use a

longer program with higher

temperatures such as Heavy Wash

or Pots and Pans."

T/ST

OP BUTT

STAR

ART/ST

T/ST

T/STOP BUTT

OP BUTTON

OP BUTT

Once you have selected the wash program and

temperature and drying options, press this button to

start the dishwasher. (Make sure the door is securely

closed.)

Start/Stop

Start/End

Option buttons

indicator

light

Page 7

button