Asko D5526XLFI 사용 설명서 - 페이지 4
{카테고리_이름} Asko D5526XLFI에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko D5526XLFI 20 페이지.
Asko D5526XLFI에 대해서도 마찬가지입니다: 디자인 매뉴얼 (20 페이지), 디자인 매뉴얼 (20 페이지)
페이지 인쇄
Before washing for the
first time
Water supply
The machine can be connected to either a hot (max. 160 °F, 70
°C) or cold water supply. We recommend a cold water supply.
The water pressure should be 4.2-140 psi. See also the section
Economic dishwashing in the chapter Loading the dishwasher.
Program key
Some dishwashers include program keys in different languages.
Attach the program key in the appropriate language to the top
of the door.
Checking water hardness
Contact the local water utility to check the water hardness in your
area. This is important to determine how much detergent and
rinse aid to use.
Fill with rinse aid
Use rinse aid to improve wash and dry times. Also use rinse aid
to achieve clear and spotless results.
1 Open the rinse aid compartment lid.
2 Carefully top up with rinse aid. Only add rinse aid to the level
marked max.
3 Wipe up any spilled rinse aid around the compartment.
4 Close the lid firmly.
Refill rinse aid indicator
When the rinse aid needs topping up, the above symbol lights
on the display.
NOTE!
After topping up, it may take a while before the symbol goes
out.
4
Setting the rinse aid dosage
The section Settings describes how to set rinse aid amount. The
rinse aid amount can be set from
(Factory settings:
)
Increase the rinse aid dosage:
If the dishes have water marks.
Reduce the rinse aid dosage:
If the dishes have a sticky white/blue film.
If the dishes are streaked.
Heavy foaming. If you have very soft water, the rinse aid can
be diluted 50:50 with water.
(Off) to
(High dose).