d&b audiotechnik Q Series 리깅 매뉴얼 - 페이지 13

{카테고리_이름} d&b audiotechnik Q Series에 대한 리깅 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. d&b audiotechnik Q Series 18 페이지. Flying frame, flying adapter

WARNING!

[R4]

[CR]

[R2]

Fig. 30: Sockets for secondary safety

Q-Series Rigging manual

4.2.

Secondary safety at Z5156 Q Flying adapter

Do not connect the secondary safety to the centre socket

[CR] (Fig. 30) at the back of the cabinet. This socket is

intended for horizontal aiming of an array and limited to a

load of 50 kg (110 lb).

The secondary safety should be applied to the top cabinet of the array.

Use two Z5048 Flying pins 10 mm connected to the sockets [R2] at the

rear of the cabinet or two Q9032 M10 Safety eye bolts attached to the

threaded inserts [R4] on both sides of the cabinet, passing the steel rope

through the Flying pins or the Safety eye bolts and attaching it to the

securing pickup point.

(1.2EN)

Page 13 of 20