Asko TD25 서비스 매뉴얼 - 페이지 10
{카테고리_이름} Asko TD25에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko TD25 17 페이지. Tumble dryer
Asko TD25에 대해서도 마찬가지입니다: 서비스 매뉴얼 (16 페이지)
페이지 인쇄
Service manual TD25
Testing the element, thermistor and temperature regulation
7.
Press the start/stop button (S1).
• LED L3 starts to flash and the large element loop acti-
vates.
8.
Press the start/stop button (S1).
• LED L3 lights continuously and the machine runs heat
regulation for 15 minutes.
• LED L4 starts flashing, which means that temperature
regulation is finished.
• Cooling runs for 5 minutes.
• The machine stops.
Testing the interval time and buzzer tone
9.
Press the start/stop button (S1).
• LED L4 lights up.
• The motor starts and runs at intervals at the same time
as a buzzer sounds.
Cancel the test programme.
10. Press the start/stop button (S1).
• The test programme stops and "End" is shown in the display (applies to machines with a display).
10
Indication of faults:
Fault indication/symp-
Cause
tom
The element does not
Element or cable fault
start.
The programme stops.
The front thermistor is
F9 is shown in the dis-
not connected.
play (applies to machi-
nes with a display).
Indication of faults:
Fault indication/symp-
Cause
tom
No buzzer tone
Fault in control