Asko TD60.C 서비스 매뉴얼 - 페이지 13
{카테고리_이름} Asko TD60.C에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko TD60.C 19 페이지. Professional td
Asko TD60.C에 대해서도 마찬가지입니다: 서비스 매뉴얼 (19 페이지)
페이지 인쇄
- 1. Table of Contents
- 2. Updates
- 3. Introduction
- 4. Troubleshooting Strategy
- 5. Product Overview
- 6. Knob and Button Descriptions
- 7. LCD Description
- 8. Programme Table
- 9. Programme Descriptions
- 10. Settings
- 11. Service Menu Content
- 12. Fault Indicators
- 13. Components and Measurement Values
- 14. Technical Data
- 15. Wiring Diagram
Service Manual TD60.C
Service menu content
SP
Fault
Test
Dry level
Block Programs
Coin
Filter
13
SP:
CM:
SW:
NCP0:
NCP1:
NCP2
NCP3:
NCP4:
NCP5:
NCP6:
NCP7:
Press the Stop button (S3) to continue.
Fault 1
Fault 2
Fault 3
Motor
Heater 1
Heater 2
Drain
Buzzer
Press the Stop button (S3) to continue.
0
+5
+10
+15
+20
Auto extra dry
Auto dry
Auto normal dry
Auto extra dry, low temperature
Auto dry, low temperature
Auto normal dry, low temperature
Auto iron dry
Off
On
Off
On
Date the software was programmed (Year_Week)
Date of manufacture of the control unit (Year_Week)
Software version
Total number of cycles run
Number of cycles for Programme 1
Number of cycles for Programme 2
Number of cycles for Programme 3
Number of cycles for Programme 4
Number of cycles for Programme 5
Number of cycles for Programme 6
Number of cycles for Programme 7
If the machine has a fault the type of fault is displayed.
Drying time not extended.
Drying time extended by 5 min.
Drying time extended by 10 min.
Drying time extended by 15 min.
Drying time extended by 20 min.
Off
Use the Stop button (S5) to toggle between On and
Off.
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Detects whether the fi lter is blocked.