Asko TDC145V 사용 설명서 - 페이지 17

{카테고리_이름} Asko TDC145V에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko TDC145V 20 페이지. 400v

INSTALLATION

See the separate installation instructions included in the

set of documents.

NOTE!

Do not install the machine in a room where there is a

risk of frost occurring. At temperatures around freezing

point the machine may not be able to operate properly.

The room in which the appliance is installed should be

adequately ventilated, with temperature between 15°C

and 25°C.

Connect the machine by plugging it into an earthed wall

socket. The electrical wall socket must be placed outside

of the installation area to be easily accessible.

• 400 V, 3-phase, 16 A

• 50 Hz

• Heat output 5000W

• Use a type A residual-current device.

NOTE!

Do not connect the machine to the mains electricity

supply by an extension lead.

The switchover must be performed by a qualiﬁ ed

electrician.

See the Settings chapter.