ACR Electronics RCL-75 제품 지원 매뉴얼 - 페이지 13
{카테고리_이름} ACR Electronics RCL-75에 대한 제품 지원 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACR Electronics RCL-75 20 페이지. Remote control searchlight system
ACR Electronics RCL-75에 대해서도 마찬가지입니다: 제품 지원 매뉴얼 (15 페이지), 제품 지원 매뉴얼 (20 페이지)
페이지 인쇄
6)
At the point where the grey bulb wire passes through the
partition wall, remove the sealant with a razor, screwdriver or snips.
Beneath the sealant is a wire sleeve. Hold this sleeve with needle
nose pliers and push through the partition wall (see Figure 12).
7)
Gently remove the entire reflector assembly from the body (see
Figure 13).
Figure 12
8)
Place the reflector assembly face down.
9)
Remove rubber sleeve (see Figure 14).
10)
Squeeze the 2 wire ends of the G-clip together to release the
insert pin from the reflector and remove the clip (see Figure 15).
11)
Pull bulb out and discard.
Figure 14
Y1-03-0158G
Figure 13
Figure 15
12