Asko CD4934B/4000 사용 설명서 지침 - 페이지 7

{카테고리_이름} Asko CD4934B/4000에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko CD4934B/4000 12 페이지.

USE

Cleaning filters

Saturation grease and carbon filters

The filters should be replaced or cleaned when the filter indicator is lit

or flashing.

Grease filter

The filter indicator will light up after 100 operating hours.

• The grease filters should then be cleaned.

The filter indicator will flash after 200 operating hours.

• The carbon filter should then be replaced.

Reset the filter indicator

1. Switch off the cooker hood by pressing the on/off button.

2. Switch off the lighting by pressing the lighting button.

Reset the memory by quickly pressing the filter indicator button.

All indicators will flash three times.

If you have a cooker hood with a carbon filter, you should activate the

carbon filter indicator.

Switching on carbon filter indicator

1. Switch off the cooker hood by pressing the on/off button.

2. Press and hold the filter indicator button for approximately

5 seconds until all buttons flash twice.

The carbon filter indicator is activated.

Switching off carbon filter indicator

1. Switch off the cooker hood by pressing the on/off button.

2. Press and hold the filter indicator button for approximately

5 seconds until all buttons flash once.

The carbon filter buttons is deactivated.

EN 7