Air & Allied Sales MP-35A Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Tools Air & Allied Sales MP-35A. Air & Allied Sales MP-35A 11 pages. Air nippers

Model No.
Product name
Product description
Length
(mm)
Weight
(g)
Grip diameter
(φ)
Air consumption
(cm3/回)
Welding pressure
(N)
Air pressure
(Mpa)
Noise emission values
(based on ISO 15744)
Vibration values
(3 axes integrated:
based on ISO 20643)
Be sure to observe maintenance check.
If check is neglected, it will become an accident and a cause of failure.
Be sure to perform maintenance check before work and after work.
Remove an air hose at any cost in the case of check and care.
・Check whether there is neither dirt nor a crack in the appearance of a main part and an air hose.
・Check whether there is neither slack nor an air leak in each connection part, the screw, the nuts,
main part, and air charging line part of a main part.
If it is used in the state where it loosened, the accident in the circumference of a worker and
a workplace may be caused, and the lack of ability by main part breakage or air leak is caused.
・Carry out the check of operation of whether the air nipper is operating normally.
(Refer to the diagram of an operation manual of operation for normal operation. )
・The scupper method of an air compressor
If an inside is covered with water or oil, it will become a cause of failures, such as generating of rust.
Remove the oil or water from inside the air compressor by drain port, before and after using
Use the dry pure compressed air.
( Refer to the operation manual of an air compressor for details. )
・Piping
Be sure to use the air which let the air filter pass and which does not contain moisture.
Remove finely so that the garbage adhering to a nipple, etc. do not enter in a hose.
・Confirm whether to find abnormality in the air compressor.
( Refer to the operation manual of an air compressor for details. )
・Every hour five or six drops should lubricate the union portion of blades during work .
・Use it by the appointed air pressure power.
It is maximum use air pressure power 0.6MPa of this machine.
Use it within the limits of this.
If it is used by the air pressure power beyond 0.6MPa, there will be a burst of the body
and fear of damage and it will become a cause of an injury.

Product specification

To help you achieve higher productivity and remarkable cost saving in cutting,
squeezing, pressing, bending and punching jobs for modern industries . Equipped with
different types of replaceable cutting blades , this AIR NIPPER can be versatile for
A-weighted sound
pressure level: dB(A)
67.6
Vibration value: m/s2
5.2

Maintenance

4/11
Air & Allied Sales (Pacific) Pty Ltd
MP-35A
AIR NIPPER
various applications .
268
920
φ56
956
4,410
0.5~0.6
A-weighted sound
power level: dB(A)
72.5
Uncertainty K
Uncertainty K
2.09
2.51
www.air-allied.com.au