Doorentryonline DT595A User Manual - Page 6

Browse online or download pdf User Manual for Door locks Doorentryonline DT595A. Doorentryonline DT595A 9 pages. 2-wire audio entry system

Print Page
With DT-CAM wiring mode - NOT available from Doorentryonline Ltd
The audio door station DT595A can be extended an additional CCTV camera to be a video door
station. For more details about the camera, please refer to DT-CAM user instructions.
DT-CAM
DT595A
Electric Lock Connection
Door Lock Controlled with Internal Power
1 2 3
Connect one lock
Jumper position in
Bus
PL S2+ S1+ S1-
EB
*
Door Lock release connected with additional power supply
Take off the Jumper
Bus
PL S2+ S1+ S1-
POWER
SUPPLY
-7-
ERL
OUT
IN
Bus PL S2+ S1+ S1-
2-3
LOCK
LOCK
AC~
PC6
DS
IM
Note:
1. Electronic lock of Power-on-to-unlock type
should be used.
2. The door lock is limited to 12V, and holding
current must be less than 250mA.
3. The door lock control is not timed from Exit
Button (EB).
4. The Unlock Mode Parameter on the Monitor must
be set to 0 (This is default).
Note:
1. The external power supply must be used
according to the lock.
2. The jumper must be taken off before connecting.
3. Setup the Unlock Mode of Monitor for different
lock types.
* Power-on-to-unlock type:Unlock Mode=0 (This is default)
* Power-off-to-unlock type:Unlock Mode=1
Monitor