Ameriwood BS1208-R Assembly Instructions - Page 2

Browse online or download pdf Assembly Instructions for Indoor Furnishing Ameriwood BS1208-R. Ameriwood BS1208-R 2 pages. Max weight capacity 330 lb

Print Page

ASSEMBLY INSTRUCTION

DISASSEMBLY INSTRUCTIONS

To remove the Seat Top from the Support Cylinder, turn the stool upside

down, and strike the edge of the Support Cylinder several times where it

meets the support. The Support Cylinder and Base Plate and Leg will

separate with applied force.

1. Use a hex wrench to attach the Base Plate

and Leg to the underside of the Tabletop with

the provided hex bolts.

2A. A Black Cap protects the hydraulic

mechanism on the Support Cylinder.

2B Remove the Black Cap and discard it

before assembly. The Orange hydraulic

button will become visible.

3. Insert the Support Cylinder into the Base

Plate and Leg and press firmly.

4. Set the Foot Cap over the hole in the

Base. Insert the thicker end of the Support

Cylinder into the center hole of the Base,

and press down FIRMLY.

5. Guide the open end of the Tabletop assembly

over the Support Cylinder and firmly press down

on the tabletop.

To raise the tabletop, grasp the Handle and pull upward without applying any

weight. To lower, raise the handle upward and apply weight to the tabletop.

Turn the stool upside down. Hit the Metal Clip

several times located in the exact center of the

bottom of the Base with a rubber mallet to

disengage the locking mechanism. The Base will

separate from the Seat Top and Support Cylinder.

Metal Clip