Amerlux GRUV - 1.5 - GB-LED Installation Instructions Manual - Page 3

Browse online or download pdf Installation Instructions Manual for Lighting Equipment Amerlux GRUV - 1.5 - GB-LED. Amerlux GRUV - 1.5 - GB-LED 6 pages.

Print Page

AMERLUX

LIGHTING SOLUTIONS

GRUV - 1.5 - GB-LED WALL MOUNTED INSTALLATION (HORIZONTAL/VERTICAL)

Gyp Board

WARNING - RISK OF FIRE AND ELECTRICAL SHOCK. FIXTURE MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN

ONLY. FIXTURE IS INTENDED FOR INSTALLATION IN ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE, LOCAL

AND FEDERAL SPECIFICATIONS. DISCONNECT POWER AT ELECTRICAL PANEL BEFORE SERVICING .

Mounting Points

6.00"

Individual Installation -

*: Fixture MUST be mounted before wall is installed.

1. Install BLOCKING as shown by

others. Secure housing to blocking

using Self-drilling screws (supplied by

others) thru Fixture Flange.

2. Once the fixture is secure, feed

power source through the knock-out.

Splice to harness according to code.

3. * Install wall (By Others)

4. Spackle in fixture.

5. Snap-in LENS.

Amerlux, LLC. - 178 Bauer Drive, Oakland NJ 07436 - T: 973-882-5010 - F: 973-882-2605

ADAPT. ABILITY.

RETAIN THESE INSTRUCTIONS FOR MAINTENANCE REFERENCE.

6.00"

Example of a continuous row

BLOCKING

SUPPORT METHOD

(SUPPLIED BY OTHERS)

Ceiling contractor

to spackle, feather

and sand at ceiling

interface.

ACCESS PLATE DETAIL

WIRING CONNECTION

0-10V DIM shown. For non-DIM applications

cap Purple (+) and Gray (-). Wire nuts

supplied by others

INSTALLATION INSTRUCTIONS

SHEET #:

689-0512 (3 of 5)

12.00"

Remove 7/8" KO in access

cover at power feed location.

www.amerlux.com

SPEC. SHEET

REFERENCE:

6.00"

BLOCKING

REQUIRED

(BY OTHERS)

SNAP IN LENS