Akw M17 DigiPump Installation And User Care Instructions - Page 5

Browse online or download pdf Installation And User Care Instructions for Plumbing Product Akw M17 DigiPump. Akw M17 DigiPump 20 pages. Digipump

Print Page

Fixing pump to surface

Fixing pump to surface
Important: For service & maintenance
purposes this product should be installed
in an accessible location.
The pump unit must be located on a
vertical surface with the inlet/outlet
connections at the bottom of the unit
in horizontal alignment, with the AKW
case logo at the top.
Pipe connections must be easily
accessible and a clearance of 100mm
around the base and sides is
recommended.
Fitting Pump Spacers
Fitting Pump Spacers
Use the Pump Spacers to prevent the cables being trapped.
Separate the spacers, remove the adhesive backing and snap lock into position
Pump Spacers
Power cable
Flow sensor
cables
5
100mm (4in)
minimum clearance all round
Remove the adhesive tab at
this hole only.