Ametek LAND 9100 Assembly Manual - Page 6

Browse online or download pdf Assembly Manual for Power Supply Ametek LAND 9100. Ametek LAND 9100 8 pages.

Print Page

Source Assembly Replacement

The following step can be omitted if the instrument serial number is 195391

or higher.

Refer to Fig. 3. Identify the transceiver processor chip (E). Remove the

old processor chip and replace it with the new chip (supplied). Use a

specialist chip remover if available; otherwise gently lever the chip from

its socket using a screwdriver. Take care not to bend any pins when

inserting the new chip.

Reassemble the instrument. Take care not to trap the green/yellow

ground wire when tightening the seven case screws (Fig. 1, Item B).

Installation Guide

Fig. 3 Transceiver processor chip

Model 9100