Baumer HUBNER BERLIN HMG10 Mounting And Operating Instructions - Page 4

Browse online or download pdf Mounting And Operating Instructions for Media Converter Baumer HUBNER BERLIN HMG10. Baumer HUBNER BERLIN HMG10 32 pages. Absolute encoder profinet with magnetic sensing
Also for Baumer HUBNER BERLIN HMG10: Mounting And Operating Instructions (40 pages)

Print Page

IMPORTANT NOTES

1.1

Symbol guide

Warning

Disregarding could result in serious injury, death or damage to property

)

Attention

Disregarding could result in damage to property or damage/malfunction of the device

Information

Additional information and recommendations

1.2

Intended use

The encoder HMG10/HMG10P is a precision measurement device for the acquisition of

speed/position information for the control of drive units and the provision of electronic out-

put signals for downstream devices�

The device must not be used for any other purpose� The function of the device is descri-

bed in this mounting instruction� The customer must check the suitability for the purpose

intended�

Mounting and selection must be executed by authorized and qualified personnel. Moun-

ting, electrical commissioning or any other work with the device or system is to be perfor-

med by appropriately qualified staff only.

Do not put the device into service if there is any visible evidence of damage�

Do not operate the device beyond the limit values stated in this mounting instruction�

Any risk of personal injury, damage of the system or company equipment due to failure or

malfunction of the device must be eliminated by corresponding safety measures�

Warning

Disregarding intended use could result in serious injury or damage to property�

1.3

Exclusion from liability

The manufacturer is not liable for any damage to persons or property resulting from unin-

tended use of the device�

1/27

MB248EN - 11171699, 19A2, Baumer_HMG10-PROFINET_II_EN