Baumer HUBNER POG 10 G Series Mounting And Operating Instructions - Page 27
Browse online or download pdf Mounting And Operating Instructions for Media Converter Baumer HUBNER POG 10 G Series. Baumer HUBNER POG 10 G Series 36 pages. Incremental encoder (twin encoder)
Also for Baumer HUBNER POG 10 G Series: Installation And Operating Instructions Manual (36 pages), Mounting And Operating Instructions (32 pages), Mounting And Operating Instructions (28 pages), Mounting And Operating Instructions (32 pages)
Print Page
7.5
Option Heizung: Stromanschluss für
Heizung
Kabellänge / Cable length ~1 m
7.6
Sensorkabel HEK 8 (Zubehör)
Es wird empfohlen, das Baumer Hübner
Sensorkabel HEK 8 zu verwenden oder
ersatzweise ein geschirmtes, paarig ver-
seiltes Kabel. Das Kabel sollte in einem
Stück und getrennt von Stromkabeln
verlegt werden.
Kabelabschluss:
HTL: 1...3 kΩ
TTL: 120 Ω
Rot/Red = +UB
Blau/Blue = 0V ( )
Weiß/White = K1
Braun/Brown = K1
Grün/Green = K2
Gelb/Yellow = K2
Grau/Grey = K0
Rosa/Pink = K0
Schwarz/Black = Err
Violett/Violet = 0V ( )
Option EMS
3)
MB069T1 - 11055669
3)
3)
Baumer_POG10-POG10G-T1_II_DE-EN (20A2)
Elektrischer Anschluss / Electrical connection
7.5
Option heating: Power supply for heat-
ing
24 V = /~
P
= 6 W
max
7.6
Sensor cable HEK 8 (accessory)
Baumer Hübner sensor cable HEK 8 is
recommended. As a substitute a shielded
twisted pair cable should be used.
Continuous wiring without any splices or
couplings should be used. Separate signal
cables from power cables.
Cable terminating resistance:
HTL: 1...3 kΩ
TTL: 120 Ω
Aderendhülsen benutzen.
Use core-end ferrules.
Kabelschirm
Cable shield
7
24