Amprobe ac68C User Manual - Page 12
Browse online or download pdf User Manual for Multimeter Amprobe ac68C. Amprobe ac68C 14 pages. True rms ac/dc clamp multimeter
4k Hz
1 Hz ± (0.5 %rdg + 5 dgt) 1 V / 5 A
20 kHz* 0.01 Hz ± (0.5 %rdg + 5 dgt) 5 V
* - Voltage input only
Resistance
Range
Resolution Accuracy
1 Ω± (1 %rdg + 5 dgt) ≤ 0.5 VDC
4 kΩ
Diode Test
Range
Resolution
G
0.001 V ± (1 %rdg + 2 dgt) 3.0 VDC max 660 Vrms
Max short circuit current: 0.8 mA (typical)
Audible Continuity Test
Range
Accuracy
40 Ω
≤ 0.5 V
Max short circuit current: 0.8 mA (typical)
Peak Hold Measurement, AC Voltage (50 Hz – 60 Hz)
Range
Resolution Accuracy
400 V
0.1 V ± (1.5 %rdg +10 dgt) 1 MΩ
600 V
1 V
Peak Hold Measurement, AC Current (50 Hz – 60 Hz)
Range
Resolution
400 A
0.1 A
600 A
1 A
Troubleshooting
In case of malfunction during the operation of the meter, the
following steps should be performed in order to isolate the cause
of the problem:
1.
Check the battery.
2.
Review the operating instructions for possible mistakes in
operating procedure.
3.
Check the clamp against a known current source. Use the
voltage function to measure a known voltage (AC and DC).
4.
Check the test leads for continuity (voltage and
resistance). Except for the replacement of the battery,
repair of the clamp should be performed only by a Factory
Authorized Service Center or by other qualified instrument
service personnel. Front panel and case can be cleaned
with a mild solution of detergent and water. Apply
sparingly with a soft cloth and let dry completely before
using. Do not use aromatic hydrocarbons or chlorinated
solvents for cleaning.
Accuracy
Open circ.volts
3.0 VDC max
± (1.5 %rdg +10 dgt) 1 MΩ
Accuracy
± (2 %rdg +10 dgt)
± (2 %rdg +10 dgt)
Open
circ.volts
Open
circ.volts
Input
Imped.
8
660 Vrms
/800 A
660 Vrms
Overload
Prot.
660 Vrms
Overload
Prot.
Overload Prot.
660 Vrms
Overload
Prot.
660 Vrms
660 Vrms
Overload
Prot.
800 A
800 A