AND MX-50 Features - Page 5

Browse online or download pdf Features for Measuring Instruments AND MX-50. AND MX-50 6 pages. Moisture analyzers

WinCT
WinCT
WinCT–Moisture consists of RsTemp software to determine the heating temperature and RsFig software for graphics.
1. Example of measurement using RsTemp software to determine the heating temperature
Automatically changes the heating temperature (by your setting increments and interval time) within a range of 30°C - 200°C. From the rate of
change in moisture over time, in one time measurement it can determine the optimum heating temperature for the sample.
Soybean flour
2. Example of measurement using RsFig graphic software
Can show moisture rate against time when the heating temperature is changed as well as showing the results of repeated measurements at a
certain temperature. From the graph, the highest possible heating range for the sample and the quickest measuring time can be determined.
Corn starch
Comparison between MS-70 and the KF (Karl Fischer) method
MS-70
KF method
With PET plastic and other materials, the MS-70 can measure a drop of moisture content of less than 1%.
Specialist knowledge is not necessary to operate the MS-70, and since measurement occurs quickly no
harmful waste is produced.
Example of PET plastic pellet measurement
Moisture rate
Average
Repeatability
value
(standard deviation)
0.298%
0.0045%
0.307%
0.0065%
KF method: a way of measuring moisture content through chemical determination.
- Moisture
- Moisture
Measurement example
Sodium tartrate dihydrate
Sodium tartrate dihydrate
Average
measurement
Measurement conditions
time
Heating temperature 180°C
Test sample
6.8 mins
Measurements
Heating temperature 180°C
19.1 mins
Test sample
Measurements
10g
5 times
0.3g
5 times