Electrolux EFA90245X User Manual - Page 11

Browse online or download pdf User Manual for Ventilation Hood Electrolux EFA90245X. Electrolux EFA90245X 21 pages. Electrolux cooker hood
Also for Electrolux EFA90245X: Installation Manual (16 pages), Installation Manual (16 pages)

Print Page

It is dangerous to alter the specifications or attempt to modify this product in any way.

Technical Information

DIMENSIONS

ELECTRICAL SUPPLY:

The symbol

on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be

handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of

correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office,

your household waste disposal service or the shop where you purchased the product.

This appliance must be earthed

Electrical Requirements

Any permanent electrical installation must

comply with the latest I.E.E. Regulations and

local Electricity Board regulations. For your own

safety this should be undertaken by a qualified

electrician e.g. your local Electricity Board, or a

contractor who is on the roll of the National

Inspection Council for Electrical Installation

Contracting (NICEIC).

Electrical Connection

Before connecting to the mains supply ensure

that the mains voltage corresponds to the

voltage on the rating plate inside the cooker

hood.

INSTALLATION INSTRUCTIONS

HEIGHT OF CANOPY:

HEIGHT OF CHIMNEY:

WIDTH OF CANOPY :

DEPTH OF CANOPY:

VOLTAGE:

POWER CONSUMPTION:

FAN MOTOR:

LAMPS : (4 x 20 W)

Note: CE Marking certifies that this appliance complies with the requirements

laid down in EEC directive 89:336. (Electromagnetic compatibility) and subse-

quent modifications and Low Voltage directive 72/23/E.

ELECTRICAL CONNECTIONS

(UPPER SECTION) 415 mm

(LOWER SECTION) 700 mm

This appliance is fitted with a 3 core mains cable and

must be permanently connected to the electricity supply

via a double-pole switch having 3mm minimum contact

gap on each pole. A Switched Fuse Connection Unit to

BS1363 Part 4, fitted with a 3 Amp fuse, is a recom-

mended mains supply connection accessory to ensure

compliance with the Safety Requirements applicable to

fixed wiring instructions.

This appliance conforms to BS 800: 1988 and EEC

Directive No. 78 308 regarding suppression of radio and

television interference.

70 mm

898 mm

650 mm

220-240 V 50Hz

330 W

250 W

80 W