Atlantic Ultraviolet SANITAIRE RSM2680 Installation Operation & Maintenance - Page 9

Browse online or download pdf Installation Operation & Maintenance for Accessories Atlantic Ultraviolet SANITAIRE RSM2680. Atlantic Ultraviolet SANITAIRE RSM2680 16 pages. Germicidal ultraviolet room air sanitizers

Print Page
Carefully examine the pin configuration on the STER-L-RAY
3.
installed correctly into the lampholder. (See Figure 6 below, which shows the lampholder, and Figure 7 below, which shows
the lamp base.)
4.
Begin installing the STER-L-RAY
STER-L-RAY
lamps have been installed.
®
5.
Holding the STER-L-RAY
connector (See Figure 8).
6. Once the STER-L-RAY
Figure 8 – Lamp Installation (Bottom)
7. Repeat until all STER-L-RAY
8. Verify unit operation by viewing the Monitoring Panel on the front of the SANITAIRE
If unit is not operating properly, go to "Troubleshooting" section on Page 14.
lamps starting with center row, continue to the next row closest to the door until all
®
Figure 6
lamp so that its pin configuration matches the lampholder, carefully push the lamp into the
®
lamp is securely seated into the connector, carefully push it into the end support (See Figure 9).
®
lamps have been installed into the unit. Close access doors and restore power to the unit.
®
lamps base to ensure that the STER-L-RAY
®
Figure 9 – Lamp Installation (Top)
RSM2680 (See Figure 3 on Page 7).
®
lamp is
®
Figure 7
9