Atlas fan company ALESSANDRA-LK Instructions Manual - Page 9
Browse online or download pdf Instructions Manual for Fan Atlas fan company ALESSANDRA-LK. Atlas fan company ALESSANDRA-LK 15 pages. 42", 56" & 72" ceiling fan
Print Page
7. FINISHING THE
INSTALLATION
STANDARD CEILING INSTALLATION
1. Tuck connections neatly into ceiling outlet box.
2. Slide the canopy up to hanger bracket and place
the key hole on the canopy over the screw on the
hanger bracket, turn canopy until it locks in place at
the narrow section of the key holes. (Fig. 13)
3. Align the circular hole on canopy with the
remaining hole on the hanger bracket, secure by
tightening the two set screws. NOTE: Adjust the
canopy screws as necessary until the canopy and
canopy cover are snug.
WARNING: Make sure tab at bottom of hanger
bracket is properly seated in groove of hanger ball
before attaching canopy to bracket. Failure to
properly seat tab in groove could cause damage to
electrical wiring.
8. ATTACHING THE FAN
BLADES
1. Fasten blade to motor using the rubber and
screws supplied. (Fig. 14)
2. Repeat process with other blades. Tighten each
screw and make sure the blade is straight.
Outlet box
Hanger
bracket
Screws
7
Screws
Canopy
Canopy cover
Figure 13
Blade bracket
Figure 14
Screws
Rubber
washers
Blade