DS Produkte 09095 Instructions - Page 2

Browse online or download pdf Instructions for Lighting Equipment DS Produkte 09095. DS Produkte 09095 4 pages.

Print Page

Dear Customer,

We are delighted that you have chosen this LED lights. If you

have any questions, contact the customer service department via

www.service-shopping.de

our website:

Explanation of Symbols and the Signal Words

Danger symbol: This symbols indicates risks of injury.

Read through the associated safety instructions carefully

and follow them.

Protection class III

Circuit symbol for direct current

Read instructions before use!

Supplementary information

WARNING

warns of possible serious injuries and danger to

life

NOTICE

warns of damage to property

Intended Use

•

The articles are suitable for use as a lamp.

•

The articles are not suitable for use outdoors.

•

The articles are not a toy. Do not leave children and animals

unsupervised with the articles!

•

The articles are for personal household use only and are not

intended for commercial applications.

•

The articles should only be used as described in these instruc-

tions. Any other use is deemed to be improper.

Safety Instructions

WARNING – Danger of Injury!

■

Danger of Suffocation! Keep the packaging material away

from children and animals.

■

Danger of Burns from Battery Acid! Batteries can be deadly

if swallowed. Keep batteries and articles out of the reach of

children and animals. If a battery is swallowed, seek medical

assistance immediately.

■

Danger of Burns from Battery Acid! If a battery leaks, avoid

physical contact with the battery acid. Wear protective gloves

if necessary. If you touch battery acid, rinse the affected area

with abundant fresh water immediately and contact a doctor as

soon as possible.

NOTICE – Risk of Damage to Material and Property

■

Do not use the articles in rooms with elevated humidity, e.g.

bathrooms.

■

Use only the battery type speciﬁ ed in the "Technical Data".

■

Take batteries out of the articles when they are dead or if the

articles are not going to be used for a prolonged period. This

will prevent any damage if a battery leaks.

■

Immediately remove a leaking battery and clean the contacts

before inserting new batteries.

■

Protect the articles from: impacts, heat, direct sunlight, sub-

zero temperatures, moisture and wet conditions.

■

Do not make any changes to the articles and do not attempt

to repair them. In the event of any damage, please contact our

customer service department.

■

Under no circumstances should you use any corrosive or abra-

sive cleaning agents, rough sponges or knives to clean the

articles. These could damage the surfaces.

DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •

*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.

Article number: 09095

Items Supplied

•

4 x LED-light with cord (1 m)

•

12 x 1.5 V battery, type AAA

•

1 x Instructions

Inserting / Changing Batteries

Insert three 1.5 V batteries, AAA type into the battery com-

partment of each lamp before you ﬁ rst use it.

Before inserting the batteries, check whether the contacts are

clean and clean them if necessary.

1. Open the battery compartment on the side of the light by

pushing the battery compartment cover in the direction of the

arrow.

2. Insert three 1.5 V batteries of the AAA type into the battery

compartment. Ensure the correct polarity (+ / –).

3. Reattach the battery compartment cover and push it close.

You must hear and feel it engage.

Replace the batteries when the power of the lamp starts to wane.

PLEASE NOTE! Always replace all batteries together. Do not use

batteries of different types or brands, or batteries with different

capacities.

Putting Into Operation

1. Unpack – Check the items supplied for possible transport

damage. If you ﬁ nd any damage to the lamp, do not use it (!),

but contact our customer service department.

2. Insert batteries – Insert batteries into the articles (see the

"Inserting / Changing the Battery" section).

3. Hang on – Place a light by hanging the cord on the desired

place.

4. Switch on / off – Pull a light down to turn it on.

Pull a light down again, to turn it off.

Cleaning and Storage

1. Take the batteries out of the articles (see the "Inserting / Chang-

ing the Battery" section).

2. Clean the articles with a soft and damp cloth and a little mild

detergent if necessary.

3. Thoroughly dry the articles before it is stored away.

4. Store the articles in a dry place that is protected from sunlight

and is not accessible to children and animals.

Technical Data

Model:

Voltage supply:

Disposal

Dispose of the packaging material in an environmentally

friendly manner and take it to a recycling centre.

Dispose of the articles in an environmentally friendly man-

ner at a recycling centre for used electrical and electron-

ic devices. They should not be disposed of in the normal

household waste.

Batteries should be removed prior to disposal of the articles

and disposed of separately from the articles. To protect the

environment, batteries may not be disposed of with normal

household waste, but must be taken to suitable collection

points.

Customer Service / Importer:

3255-4

each light 4.5 V DC (3 x 1.5 V battery, type AAA)

✆

+49 38851 314650 *)

Instructions

Z 09095 M DS V1 0718