DSC FSD-100 User Manual - Page 16

Browse online or download pdf User Manual for Smoke Alarm DSC FSD-100. DSC FSD-100 16 pages. Smoke detector sensitivity meter
Also for DSC FSD-100: User Manual (16 pages)

Print Page

Limited Warranty

Digital Security Controls warrants that for a period of twelve months from the date of purchase, the product shall be free of

defects in materials and workmanship under normal use and that in fulfillment of any breach of such warranty, Digital Security

Controls shall, at its option, repair or replace the defective equipment upon return of the equipment to its repair depot. This

warranty applies only to defects in parts and workmanship and not to damage incurred in shipping or handling, or damage due

to causes beyond the control of Digital Security Controls such as lightning, excessive voltage, mechanical shock, water damage,

or damage arising out of abuse, alteration or improper application of the equipment.

The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and all other warranties, whether

expressed or implied and of all other obligations or liabilities on the part of Digital Security Controls. Digital Security Controls

neither assumes, responsibility nor authorizes any other person purporting to act on its behalf to modify or to change this war-

ranty, nor to assume for it any other warranty or liability concerning this product.

In no event shall Digital Security Controls be liable for any direct, indirect or consequential damages, loss of anticipated profits,

loss of time or any other losses incurred by the buyer in connection with the purchase, installation or operation or failure of this

product.

Smoke Detectors

Smoke detectors that are a part of this system may not properly alert occupants of a fire for a number of reasons, some of

which follow. The smoke detectors may have been improperly installed or positioned. Smoke may not be able to reach the

smoke detectors, such as when the fire is in a chimney, walls or roofs, or on the other side of closed doors. Smoke detectors

may not detect smoke from fires on another level of the residence or building.

Every fire is different in the amount of smoke produced and the rate of burning. Smoke detectors cannot sense all types of fires

equally well. Smoke detectors may not provide timely warning of fires caused by carelessness or safety hazards such as smoking

in bed, violent explosions, escaping gas, improper storage of flammable materials, overloaded electrical circuits, children playing

with matches or arson.

Even if the smoke detector operates as intended, there may be circumstances when there is insufficient warning to allow all

occupants to escape in time to avoid injury or death.

Warning: Digital Security Controls recommends that the entire system be completely tested on a regular basis.

However, despite frequent testing, and due to, but not limited to, criminal tampering or electrical disruption, it is

possible for this product to fail to perform as expected.

Important Information: Changes or modifications not expressly approved by Digital Security Controls could void

the user's authority to operate this equipment.

FCC Compliance Statement

CAUTION: Changes or modifications not expressly approved by DSC could void your authority to use this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

• Re-orient the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

The user may find the following booklet prepared by the FCC useful: "How to Identify and Resolve Radio/Television Inter-

ference Problems". This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402, Stock #

004-000-00345-4.

Industry Canada Compliance Statement

This Class B digital apparatus meets all requirements of the Canadian interference-causing equipment regulations.

Cet appareil numérique de la Classe B respecte toutes les exigences de règlement sur le matériel brouilleur du Canada

Toronto, Canada • www.dsc.com

Technical Support: 1-800-387-3630 (Canada & US), 905-760-3036

Printed in Canada

29034666R003