aTTo Digital nanoREC User Manual - Page 4
Browse online or download pdf User Manual for Voice Recorder aTTo Digital nanoREC. aTTo Digital nanoREC 8 pages. Mini voice recorder
Print Page
editor installed in your system and put the current time and
date with the following format: yyyymmddhhmmss , where
yyyy - is four digit year (ex. 2017), mm - is 2 digit month (ex.
for May is 05), dd - 2 digit day (ex. if today is in 3rd - you
must put 03), hh - means 2 digit hour in the 24 hours format (
not a.m. or p.m.) - ex. for the time clock 5 p.m. you must use
the digit 17, for 6 a.m. is 06, etc; mm - is 2 digit format for
minutes and ss - is 2 digit format for seconds.
Let's take for example how to create the format of date and
time:
If today is 22 of May 2017, the time is 05:24 p.m. you must
put in the time.txt file the following digits: 20170522172400
(no spaces in front or after these digits). After you insert these
digits in the time.txt file save the file, disconnect the recorder
from the computer and when you will turn it ON the device
will automatically create audio files named after the time and
date when you start the device.
◆ Charging: Connect the USB cable to computer and to the
nanoREC voice recorder. When the red light blinks, it means
charging, when fully charged, the indicator light steady red. It
can continue recording about 20 hours once fully recharged.
Note: If the indicator light becomes red and blinking during
recording, it means the battery is low; please stop recording
and charge the device.