Attop W10 Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Drones Attop W10. Attop W10 6 pages.

Print Page

4. Remote controller

（1）

（3）

（2）

（4）

（5）

（6）

（7）

（8）

（9）

（10）

5. Preparing to fly

(1) Switch on the power

Switch on the drone

ATTENTION: Please finish the aboved 2 steps within 10 seconds!

1. Hearing a beep from controller, and the LEDs of drone stop flashes,

mean is automatic syncing success between Drone and Controller.

2. Now, the drone is contolled by Controller, the smart phone APP could not

control the drone.

Please place the drone onto a flat surface before Switch on the

drone power!

6.Using the remote controller

Left Control Stick

Ascend / Descend

Turn left / Turn Right

7. Toss to taunch

After frequency matching and calibration finished, you can hold the aircraft

in your hand, and then horizontally throw it out. The aircraft will automatically

unlock the blades and fly in the air.

Note: It is better to operate the calibration step again after operating

Throw to fly for several times. The function will be more stable.

（1）Antenna

（2）Left Control Stick

（3）Right Control Stick

（4）Power Button

（5）One Key Take Off / Landing

（6）Headless Mode

（7）Mobile Device Holder

（8）One Key Return

（9）Take Photos / Video

(Please make sure to open the App on your smart

phone before using it, then you can review the

videos taken in the media file of App.)

（10）Battery case

Switch on the Remote

Right Control Stick

Forward / Backward

Left Side / Right Side

(2) Calibration

(3) Unlock the aircraft for take-off

After calibration succeed, Push the Left Control Stick up and then release

(OR push the Left Control Stick to the lowest left, and meanwhile push the

Right Control Stick to the lowest right), the rotors start rotating slowly, which

means motors unlock succeed. Release Control Stick and push the Left

Control Stick slowly to take off the drone.

（4）One Key Take off / Landing

Or After unlock the motors, press

take off automatically.

When flying in the air, press

automatically.

One Key Take off / Landing

In case of emergency status, Press and Hold

the

immediately stop functions and drop off.

8. Aircraft functions

(1) Speed mode

Press the Left Control Stick to change the speed mode when flying.

The default speed is the most slowly one, when press one time you will hear

"beep beep", then go into the second speed acceleration, and press again with

"beep beep beep" to the final fastest speed. Totally 3 speeds and repeat by

pressing the button.

Remark: Beginners would be suggested to use the default speed firstly to

play until skillful.

Left Control Stick

(2) Headless mode

Headless Mode: When the head of drone torwards the front, press

to activate Headless function.The drone will fly according to the controlled

direction on remote, no matter which direction the head of drone torwards to,

it will fly according to your controlled direction on remote controller.

Press

button again to deactivate Headless function.

Note： Please make sure head of drone torwards the front and remote

torward to the tail of drone before activate Headless function.

Place the drone onto a flat surface and push

the Left and Right Control Stick as the image

and the controller would make a sound "beep".

The LEDs of drone are flashing, and then stop

flashing, that means calibration succeed.

button to land

Emergency Stop

button about 2 seconds, the drone will

Headless mode

button to

button