Aucma AUS-S2 Operation Instruction Manual - Page 4

Browse online or download pdf Operation Instruction Manual for Water Filtration Systems Aucma AUS-S2. Aucma AUS-S2 7 pages. Ultrafiltration under sink water filter system

Print Page

Product introduction

Product features

1.The outer cabinet uses materials of premium stainless steel and ABS plastic, corrosion

-resistant, and long life-expectancy;

2.Three-step filtration, can effectively remove the hazardous substances such as colloid,

suspended solids, bacteria, etc, the filtered water is premium drinking water;

3.Applies integrated disposable filter element, which is healthy and safe, and it is easy

and simple to change the filter;

4.Intelligent filter will show the life expectancy, the light will shine to warn its time to

change the filter if it is time, making your drinking water healthier and safer;

5.No need for connecting to outer power, no need to increase pressure, energy efficient

with no waste water;

6.The water flows in and out through 1/4'' PE pipe, convenient for connecting and safe.

Filter Function Introduction

Grade of filter

Filter name

Effectively filter sediment, rust, suspended colloid, red worm and other solid

impurities; Remove residual chlorine, peculiar color and odor,

First grade

PPC composite filter

macromolecular organic compounds and other impurities in water.

Effectively intercepts micro suspended solids, colloid and bacteria in water.

Second grade

SUF filter

Absorb peculiar color and odor in water, improve the taste and make the

Third grade

CTO filter

water sweeter and healthier.

Filter function

Installation Guide

Installation Method

Before installation, make sure if the attachments in the packing are unbroken.

1.Environmental requirements for Installation

1.1 On the location where the filter is installed, municipal tap water connection is a

necessity.

1.2 The installation location should be clean and sanitary, no pollution around, and no

direct sunshine; no flammable or combustible or electrical equipment around, protected

from rain.

Note: Pay attention to personal safety when using drilling tool, and there's should be no

hidden water, electricity, or gas pipelines at the drilling position.

2.Refit of the waterway/installation of incoming water three-way valve

2.1 Tools and materials needed: conjoined three-way valve (part), sealing tape (water

tape), PE pipe, monkey wrench (wrench), smooth/nipper pliers, etc.

2.2 Sweep and clean the installation area, close incoming water main valve, dismantle

water pipe faucet (faucet or angle valve, etc).

2.3 When installing the three-way valve, dismantle the faucet or angle valve first,

connect the incoming water valve onto the three-way valve, then connect back to the

faucet or angle valve together with the three-way valve.

2.4 Installation of incoming water pipe: using PE pipe to link incoming water ball valve

and the water inlet of the cabinet. Be sure to leave enough reserved length.

2.5 If the pressure of incoming water is over 0.4MPa, pressure valve needs to be

purchased and installed in addition.

inflow water three-way

ball valve

tap water faucet or

angle valve

inflow water PE pipe