Elite Acoustics Engineering D6-8 MKII Quick Manual Handbook - Page 4
Browse online or download pdf Quick Manual Handbook for Amplifier Elite Acoustics Engineering D6-8 MKII. Elite Acoustics Engineering D6-8 MKII 10 pages. 80w lithium battery powered acoustic amplifier with 6 channels, digital mixer & effects, and bluetooth
Print Page
"System" : "Routing"
Assign "Pre" or "Post" fader i.e., "Main
Mix" Channel 1 through Channel 6,
signals to the Aux Sends. You can also
select either "Main" mix or "Aux" mix as
the source for the XLR outputs.
LCut
LowM
"System" : "XLR out EQ"
Setting for EQ for the XLR outputs
when it is SET on "MAIN outputs"
Ch1
Ch2
"Chorus" : "Chorus Sends"
Adjust the Chorus level of each of
the 5 channels.
Mod
Fbck TimX BPM
"Delay" : "Delay Param"
Adjust "Modulation," "Feedback,"
"Time Offset," "BPM" Delay Time, and
"Level" of the delay.
Ch1
Ch2
"Reverb" : "Reverb Sends"
Adjust the Reverb level of each
of the 5 channels.
Xlr Out
Eq
Hi
Mid
idF
Chorus
Sends
Ch56
Ch3
Ch4
Delay
Param
Lvl
1
120
Reverb
Sends
Ch56
Ch3
Ch4
System
"System" : "Scenes"
Save and Recall up to 10 mixes i.e.,
"System" : "Input Levels"
Displays a bar graph for each
channel's input level. Adjust the
channel's "Gain" pot to set desired
Chorus
"Chorus" : "Chorus Param"
Adjust the Depth of the Chorus for
each of the 5 channels.
Delay
"Reverb" : "Delay Routes"
Assign a channel to the delay. Note
that this is an "insert" type effect and
is intended for a selectable single
channel. It precedes the Reverb and
Reverb
"Reverb" : "Reverb Param"
Adjust the Decay and Tone of the
scenes.
level.
Delay
Route
1
Chan
Chorus effects.
Reverb.