Anywire ASLINKER BL2LN87SB-02DS-CC20 System Product Manual - Page 4

Browse online or download pdf System Product Manual for Adapter Anywire ASLINKER BL2LN87SB-02DS-CC20. Anywire ASLINKER BL2LN87SB-02DS-CC20 20 pages.

[Functions]
Model
Speci cations
ASLINKER
NPN input: 2 points
4-wire (isolated)
PNP input: 2 points
cable type
Alarm bit: 2 points
*
1 It depends on lot No. whether this function is available or not.
*
2 This terminal can be used in connection to the AnyWireASLINK unit for word transmission. Note that this terminal cannot handle word data by setting a word address.
*
3 To use these functions, a master unit that supports each function is required. For details, refer to the manual for the master unit together with this manual.
■Detecting functions (Status details)
Slave unit voltage
Sensing level drop
drop
×
[Function Compatibility by Lot No.]
This unit has undergone addition of functions and change of speci cations according to version upgrading.
Available functions and speci cations of the unit vary depending on lot No.
Function
*
4
Word transmission
LED indication for single unit
simpli ed replacement function
Alarm bit setting
(Equipment parameters 5 and 13)
*
4 This terminal can be used in connection to the AnyWireASLINK unit for word transmission. Note that this terminal cannot handle word data by setting a word address.
*
5 The single unit simpli ed replacement function works even if the lot No. does not support the LED indication for the single unit simpli ed replacement function.
(When the master unit executes the single unit simpli ed replacement function, addresses/parameters will be written, if speci ed conditions are satis ed.)
■How to check
Lot No. is indicated on the lot label.
Connection targets
General-purpose
Bit
sensors
transmission
General-purpose
*
1
switches
Functions
I/O disconnection
I/O short-circuit
Available with S/W version "B" or later version
*
(If lot No. is indicated in 3 digits (year and
5
month only), these functions are not available.)
Back of this unit
-BL2LN87SB02D*CC20 4/20-
Functions
Single unit
Remote
*
*
1
2
Word
simpli ed
address
transmission
*
3
replacement
change
I/O power supply
drop
Lot No.
Example:
Lot No. 19ECBNB
H/W version
S/W version
Detection of sensor cable
disconnection
2-wire type
3-wire type
*
3
sensor
sensor
Function version
Address
Bit
Word
address
address
setting
setting
×