Anzzi ENVO WH-AZ146-M2 Install & Operation Manual - Page 11
Browse online or download pdf Install & Operation Manual for Water Heater Anzzi ENVO WH-AZ146-M2. Anzzi ENVO WH-AZ146-M2 16 pages. Electric instant water heater
Print Page
INSTALLATION
Step 1:
1.Locate appropriate installation position
for the water heater.
2.Place template(provided) on wall and
use pencil to mark screw hole locations.
Make sure the outlet and inlet pointed
downward vertically.
Step 3:
Screw mounting
Slot
Fig 3
Step 2:
If screw locations are in wall stud, drive
mounting screws directly into stud. If screw
locations are not in stud. Drilling three
0.24''(6mm) diameter holes on the wall.
Insert the plastic anchors into the holes and
then drive screws into wall anchors.
1. Place water heater on wall and
slide onto mounting slots to secure.
2. Ensure water heater is level and
secure on wall.
PG.7