Addictive Desert Designs ADD-Lander Quick Start Manual - Page 4

Browse online or download pdf Quick Start Manual for Automobile Accessories Addictive Desert Designs ADD-Lander. Addictive Desert Designs ADD-Lander 5 pages. 2005-current toyota tacoma overland rack
Also for Addictive Desert Designs ADD-Lander: Installation Instructions Manual (6 pages)

Print Page

ADDICTIVE DESERT DESIGNS® ®

ADDICTIVE DESERT DESIGNS

5. Tighten the front facing bolts on the front cross member to 30 foot pounds. You may to move the chase rack

as far back as you can to access the front of the bolt heads. (Fig E) Leave the rest of the cross member bolts

loose for now.

Tighten these two bolts before

tightening the 1/2" mounting bolts,

but do not tighten any other cross

member bolts.

Fig E

6. Tighten the 1/2" Mounting Bolts to 57 foot pounds.

7. Tighten the remaining 3/8" Mounting Bolts to 30 foot pounds.

8. Stand back and enjoy your new ADD-Lander™ Overland Chase Rack.

9. Check and re-tighten, if needed, all mounting bolts after 100 miles and periodically thereafter.

Addictive Desert Designs® | Page 4

2020-Current Jeep Gladiator JT ADD-Lander™

Overland Rack Installation Instructions