Abus IPCB42501 Installation Manual - Page 6

Browse online or download pdf Installation Manual for Security Camera Abus IPCB42501. Abus IPCB42501 9 pages.

Print Page

3. Connections and functions

ATTENTION!

Before you begin the installation, make sure that the supply voltage and the nominal

voltage of the camera match.

3.2 Call factory default settings (Reset)

1. Please disconnect the camera form power connection.

2. Press the "Reset" button on the camera and keep it pressed.

3. Now connect the power supply to the camera (2-pin power supply or Power over

Ethernet), and hold the "Reset" button pressed for another 30 seconds.

3.3 Switching input/output (only IPCB42551)

The maximum load values must be observed, otherwise, the camera may be

irreparably damaged.

Switching input

Switching output „O"

Description

Connection information

„I"

Bridge between „Alarm In" and „GND"

„GND"

5 VDC ~12 V DC, max. 30 mA, please note the connection

polarity

„GND"

12 VDC, round plug, 5,5 x 2,1 mm