AudioCodes Mediant 800C Quick Setup Manual - Page 4
Browse online or download pdf Quick Setup Manual for Controller AudioCodes Mediant 800C. AudioCodes Mediant 800C 10 pages. Session border controller
Print Page
Connecting Device to Power
The device is powered from a standard alternating current (AC) electrical wall outlet.
The device must always be grounded (earthed). Grounding should be done in accordance with the safety and
electrical regulations enforced in the country of installation.
To connect device to power:
1.
Ground the device, by connecting an electrically earthed strap of 16-AWG wire (minimum) to the
device's grounding screw (located on the rear panel), using the supplied washer and fasten the wire
securely using a 6-32 UNC screw. Connect the other end of the strap to protective earthing.
2.
Connect the device to power by plugging the AC power cord (supplied) into the device's AC power inlet,
located on the rear panel. Connect the plug at the other end of the AC power cord to a standard AC
electrical wall outlet.
3.
Check that the device is receiving power (POWER LED on front panel should be on - green).
Warning (Grounding)
4 |
P a g e