Danish Interpretation Systems DCS 6000 User Manual - Page 7

Browse online or download pdf User Manual for Conference System Danish Interpretation Systems DCS 6000. Danish Interpretation Systems DCS 6000 10 pages. Digital conference system
Also for Danish Interpretation Systems DCS 6000: User Manual (19 pages), User Manual (14 pages), User Manual (14 pages), User Manual (13 pages), User Manual (18 pages), User Manual (14 pages)

Print Page

Danish Interpretation Systems

Operating instructions

JB 6002/04 Junction Box

General description

The JB 6002/04 Junction Boxes are part of the DCS

6000 system and enables the DCS-LAN to be split

into 2 or 4 I/O buffered ports.

The JB 6002/04 is used to split the DCS-LAN for

tap-out connection of a DCS 6000 conference unit.

Features

The main features of the JB 6002/04 are:

Loop through of the DCS-LAN.

2 or 4 independent DCS-LAN tap-out ports.

Redundancy enhancement as other tap-out ports

are unaffected by potential network damage on

one tap-out port.

Enables single cable connection to each unit

Designed in a small size easy-to-install cabinet.

Connectors JB 6002/04

The JB 6002/04 features the following connectors:

Loop through chain

RJ45 connector, 2 pieces

DCS-LAN connectors used for connection to the

CU 6000/CU 6010 and for connection to other units

with DCS-LAN connectors such as more JB

6002/04.

These connectors have auto termination.

Unit connector

RJ45 connector, 2 pieces (JB 6002), 4 pieces (JB

6004

Each connector is for connection to one Delegate

Unit or one Interpreter Unit or up to four Channel

Selectors. This limitation is because the 'Unit'

connectors have current limiting devises for the

power line.

Maximum cable length on the 'Unit' connector: 10

Note: The connected unit must be terminated (either

by auto termination or terminating plug (CS 6032)).

Unused 'Unit' connectors of JB 6002/4 do not need

termination.

LED Indications on JB 6004

In addition to the above-mentioned connectors, the

JB 6004 features the following indications

Power LED

This LED lights up when Power is available on the

connector next to the LED.

Outgoing data

This LED lights up, when the Junction Box receives

data from the CU 6010 Central Unit (at the 'Loop

Through Chain').

Incoming Data

This LED lights up, when the Junction Box

received data from the connected Unit(s) (at the

'Unit' connector).

System design

There are no settings to be done on the JB 6004

Junction Box.

Regarding the number of units, which can be

connected to the CU 6010, please refer to the CU

6010 User Manual.

Manual 01 18 04453

User Manual