DANIU RTU5024 User Manual - Page 8
Browse online or download pdf User Manual for Gate Opener DANIU RTU5024. DANIU RTU5024 13 pages. Gsm gate opener gsm remote switch
Print Page
www.daniu-iot.com
the input is in ENGLISH INPUT METHOD and CAPS LOCK.
12. The SMS commands that you will certainly use in the GSM Gate Opener are the following:
6.1 Setup New Password
RTU5035
pwd#PWDnewpassword#PWDnewpassword#
if successful, the unit will return:
For example, the original password is 1234, you want change it to 6666, then you can send the
command below:
1234#PWD6666#PWD6666#
Tips:
1.The pwd in the commands is means the password, when you use it, please in stand of it by
the digital number, the capital letters PWD is the command letter, use PWD directly.
2.Remember that commands must be CAPITAL Lock LETTERS. It is PWD not pwd, CAP not Cap
etc. Don't add spaces or any other character. When input punctuation symbol #, must be
under ENGLISH or DIGITAL input method. Not support other input method.
6.2 Setup Authorized number
pwd#TELAuthorized Number#Serial Number#
E.g.: if you want to setup 13500001111 as the first user number, and the password is 1234,then you
can send
1234#TEL004413500001111#001#
0044 is country code, will return:
Tips:
1. the authorized number means the one who can dial the RTU5024 unit to open it.
2.We strongly recommend that the serial number of 01 is cellphone number, because of the
Relay action message only send to the first position number;
3. The Serial Number is the position to store the authorized number, from 001~200.
6.3 Inquiry the Serial Number's Authorized number
pwd#TELSerial Number？
E.g.: If you want to know the authorized number at position 2, and the password is 1234,then you can
send
1234#TEL002?
6.4 Remove the Authorized Number
New
Password:xxxx.
001:004413500001111
002: Empty
003: Empty
004: Empty
005: Empty
to check it.
to the RTU5024 unit. After the RTU5024 received, the
- 6 -