Audion Mk2 User Manual - Page 6
Browse online or download pdf User Manual for Amplifier Audion Mk2. Audion Mk2 10 pages. Sterling power amplifiers 12 & 18 watt
POWER
0
1
Audion Sterling Integrated / Remote Amplifier Rear Panel
POWER
0
1
Audion Sterling Mono-block Amplifier Rear Panel
First connect audio input leads to the input RCA connectors. In the
case of the integrated / remote models, connect all audio input
leads. The top white sockets are for the Left input(s) the bottom
red sockets are for the Right channel(s).
Next, connect the loudspeaker cables to your Audion. For all
Stereo models the left and right channels are marked by red/black
colouring and also ground & channel name; ie. left, right etc. Your
loudspeaker cables should be of a suitable quality and connect to
the corresponding red/black binding posts of the loudspeaker. To
achieve the best from your Audion we recommend that your
loudspeakers have an efficiency of 89 db or higher.
Unless ordered specifically all the above models come with an 8
ohm output. The Mono-block Amplifiers come with 2 x 8 ohm
Revision 1.40 Sterling
OFF
ON
Ground
GND
H.T.
fuse
lift
Off
On
1
Ground
H.T.
fuse
lift
INPUTS
TAPE
5
4
OUTPUTS
RIGHT
LEFT
OUTPUTS
2
3
- 6 -
3
2
1
L
R
GND
INPUT
4
Audion International