Abus PLBW10000 Manual - Page 8

Browse online or download pdf Manual for Security Sensors Abus PLBW10000. Abus PLBW10000 18 pages. Dual motion detector
Also for Abus PLBW10000: Quick Manual (2 pages), Quick Manual (4 pages)

Print Page

English

2. Functional overview

2.1. Inclusion / teach-in device

Open the screw and remove the front cover of the

motion sensor.

Activate the inclusion mode (teach-in mode) on the Z-

Wave controller. (please refer to the Z-Wave controller

manual for more details)

Press the "+" button (Add / Inclusion) in your Z-Wave

app and follow the instructions to set the Z-Wave

controller to inclusion mode.

Keep the device within reach of the Z-Wave controller.

Remove the safety strip from the battery compartment.

We recommend the exclusive use of the original GP

battery from the scope of delivery.

The device supports automatic inclusion, i.e. it

automatically goes into inclusion mode when it is

powered and not yet connected to a Z-Wave controller.

The LED starts flashing.

Alternative/manual inclusion:

If you have already inserted the batteries, press the

Link button 3 times quickly (within 1.5 seconds) to start

the inclusion process.

Successful inclusion is displayed in the app or on the

Z-Wave controller and the status LED on the device

stops flashing.

It may take up to 60 seconds after inclusion before

the LED goes out. During this time the PIR sensor

calibrates itself, only as soon as this warm-up phase

is completed the LED goes out.

Repeat the inclusion process if it was not successful.

If a new attempt fails as well, first carry out a factory

reset on the device, see 2.5.