Apogee AD-16X Specifications - Page 2
Browse online or download pdf Specifications for Accessories Apogee AD-16X. Apogee AD-16X 2 pages. Audio interface system
Also for Apogee AD-16X: Review Manual (3 pages), Brochure (7 pages)
Print Page
Specifi cations
AD-16X
Inputs
:
• Analog in 1-8 Balanced, DSUB 25pin connector
• Analog in 9-16 Balanced, DSUB 25pin connector
• WC in: BNC 75 ohm with switchable termination
Outputs
:
• AES-EBU out x 8, transformer balanced, DSUB 25pin connector
(192k single wide compatible)
• Optical: toslink x 4, supporting ADAT and SMUX protocol
• WC out: BNC 75 ohm
Expansion Slot:
• One x-type card can be installed, for FireWire, HD and or other
future format connectivity.
Specs:
• Sample rates internal: 44.1/48/88.2/96/176.4/192k
• Sample rates external: 44.1/48/88.2/96/176.4/192k +/- 10%
• Frequency response at 44.1 k : 5 - 20.000 Hz (+/- .2 dB)
• Analog levels: 6 to 24dBu max through digital gain adjustment.
(Compatible with -10dBV levels)
• THD+N: -110 dB
• Dynamic range: 120 dB A weighted
• Power: 100 -240 VAC, 50 - 60 Hz, 65 Watt
AD-16X REAR PANEL
DA-16X REAR PANEL
Due to on-going development Apogee reserves the right to change all information and specifi cations without notice.
APOGEE ELECTRONICS CORP.
3145 Donald Douglas Loop South
Santa Monica, CA 90404
For more info:
Call: 310 915.1000
www.apogeedigital.com
© 2003 Apogee Electronics Corporation. All trademarks herein are property of their respective holders.
Doc: ADDA16X_DS, FEB/04 • PRINTED IN USA
DA-16X
Inputs
:
• AES-EBU in x 8, transformer balanced, DSUB 25pin connector
(192k single wide compatible)
• Optical: toslink x 4, supporting ADAT and SMUX protocol
• WC in: BNC 75 ohm with switchable termination
Outputs
:
• WC out: BNC 75 ohm
• Analog out 1-8 Balanced, DSUB 25pin connector.
• Analog out 9-16 Balanced, DSUB 25pin connector.
Expansion Slot:
• One x-type card can be installed, for FireWire, HD and or other
future format connectivity.
Specs:
• Sample rates internal: 44.1/48/88.2/96/176.4/192k
• Sample rates external: 44.1/48/88.2/96/176.4/192k +/- 10%
• Frequency response at 44.1 k : 5 - 20.000 Hz (+/- 0.2 dB)
• Analog levels: 6 to 24dBu max through digital gain adjustment.
(Compatible with -10dBV levels)
• THD+N: -107 dB
• Dynamic range: 118 dB A weighted
• Power: 100 -240 VAC, 50 - 60 Hz, 65 Watt
THE APOGEE X-SERIES
16 Channel, 24bit/192kHz,
A/D & D/A Conversion System
Featuring X-Series Expansion Cards for direct connectivity with:
ProTools | HD and all other popular DAW's via FireWire