ADE HWZ-15 Operating Manual - Page 10
Browse online or download pdf Operating Manual for Scales ADE HWZ-15. ADE HWZ-15 20 pages. Electronic counting scale
Print Page
You can add more products. To do this, press
entries or the full capacity of the "Weight" window.
To view the saved total value, press the
To print the total number of units, first press
RS232 data interface.
To clear the memory, first press
all values from memory.
8.4.5 Automatic totaliser
The scale can be set to automatically add total sums when a weight is placed on the scale. It is
no longer necessary to press the
and can be pressed to save the values immediately. In this case, the values will no longer be
saved when the scale returns to zero.
See section 9 (parameters) for details on setting the automatic totaliser.
9.
Backlight and parameter setting
9.1
Backlight of the LCD display
The backlight of the LCD display can be set to be permanently on; it can also only be switched on
when a weight is on the scale; or it can be turned off.
To adjust the backlight, press and hold down the
The "Weight" window shows the current setting for the backlight "EL xx".
EL Au
Automatic backlight when a weight is placed on the scale or when a key is pressed.
EL OFF Switching off the backlight.
EL On
Permanent activation of the backlight
Press the
key to select the desired setting.
Confirm with
9.2
Scale-specific parameters
To set the parameters, go to a saved menu. To do this, you have to enter a code.
To set the parameter menu, press the
on.
The "Weight" window shows "PLn": Enter your code.
The default code is "0000". With the help of the parameter menu (see below) it can be changed
as desired. Press
The parameter menu has 11 functions. To navigate through these functions, press the
The "Weight" window shows the names of the functions. To select a function, press the
To navigate through the values of this function, press
You can press the
10
to view the total sums and then press the
key to save values. However, the
.
0
key 4 times and confirm with the
key at any time to return to weighing mode.
each time. This process can save up to 99
key. The total sum is displayed for 2 seconds.
and then
. The prerequisite is the optional
key for 6 seconds.
key during the test run of the display after switching
key.
. Press
C
key to clear
key is still active
key.
key.
to save the selection.
HWZ-190214-Rev006-UM-en