ADE KE 926 Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Scales ADE KE 926. ADE KE 926 14 pages.

Thank you for your decision to purchase this high quality product of ADE Germany. You
bought a scale featuring highest technical standard and well-proven quality.
Please read this instruction manual prior to the start up and keep it careful to have this
information on hand whenever needed.
1.
Preparation for use
Activate / Replace batteries:
Open the battery cover at the bottom side of the scale and
remove the battery safety strip. Please ensure the correct polarity
of the battery (+/-).
To replace batteries open the battery cover and move in each case the batteries at the
recess downwards and the batteries will be easy to take out. Make sure that you do not
bend the contact. Insert the new batteries and close the battery cover.
Safety guideline s:
Please care that no heavy object may fall on the scale.
Otherwise, the scale may become damage.
Clean the scale only by using a slightly damp cloth. Do not use
solvents or abrasive cleaning agents. Do not submerge the
scale under water. All plastic parts of the scale should been
cleaned immediately after contact with fat, spices, vinegar and
other heavily spiced or coloured food. Avoid contact with citric
acid.
2. Handling
Switch-on the sca le:
Press down on the scales' surface for about 2 seconds with a pressure of 500 g to
switch the scales on. Shortly the signal run through and in the display appears the signal
"0 g" / "0,0 fl.oz" / "0: lb 0,0 oz" or "0 ml" according to the setting. Now the scale is
ready to use.
2
Units of weight:
By touching the UNIT-panel it is possible to change the unit of weight for country specific
setting (g = gram / fl.oz. = fluid ounce / lb = pound / ml = millilitre). Please pay attention to
use the scale under consideration of your country specific unit of weight.
Tare-func tion:
Use the
|TARE-panel to set the scale to "0". Place for example a bowl on the weighing
platform. Upon the weight is indicated touch the
again to zero. This process is repeatable until the max. capacity of the scale (5 kg) has
been reached. After removal of the load, the total weight will be indicating.
Automatic switch-off the sca le
If the indicated weight does not change within approx. two minutes, the scale will
automatically switch-off.
3. Error Messages
"Lo"
=
Batteries are used up - Please replace the batteries with the
intended type (2 x CR 2032).
"EEE E"
=
Overload - The weight exceeds the maximum capacity of 5 kg.
Please immediately remove the critical load to avoid load cell
damage.
4. Technical Data
Capacity x graduation:
Max. 5 kg x 1 g
Dimensions:
approx. 230 mm x 150 mm x 15 mm
Batteries:
2 x CR 2032 (included)
Subject to technical modifications

5. Warranty

ADE warrants for a period of 3 years from the date of purchase that it will remedy any
defects due to faulty material or workmanship free of charge by repair or replacement.
When purchasing, please have the warranty coupon signed and stamped by the dealer.
When making a guarantee claim, please return the scale together with the guarantee card
including the reason of complaint to your dealer.
|TARE-panel to set the indication
3