ADE M50610 Operating Manual - Page 5

Browse online or download pdf Operating Manual for Scales ADE M50610. ADE M50610 8 pages. Electronic wheelchair scale with cable display

Print Page

Press key ON to start the scale. `8888´will appear on the display which is an automatic

function test and zero setting. When `0.0´appears you are in the kg weighing mode. In addition

display will show the symbol `o´ to confirm stability of the zero setting.

You may now put load on the scale.

After display is showing the weight and symbol `o´ appeared the most accurate result has

been reached.

To turn off the scale press key OFF for minimum 3 seconds. This is essential if scale is used

on batteries. Using the scale on mains it may remain permanently switched on or can be shut

off manually by pressing key.

You may select the weight unit between kg and lb. Coming from the factory the scale is switched to kg

mode. To change into lb mode press UNIT/HEIGHT key.

Caution

Please check weighing mode after switching to get proper result.

You may set any displayed weighing result back to zero `0.0´by pressing the ZERO key. The

advantage is to weigh for example the wheelchair separately.

Take weight of the empty wheelchair.

Press ZERO key.

Unload the scale.

The weight displayed before is showing a negative value and will be deducted automatically

during the next weighing procedure.

The negative value will not be stored.

The tare function allows to store a fixed weight that will be deducted each weighing procedure unless

deleted or replaced by another. This is especially useful if patients are weighed always in the same

wheelchair.

Take weight of the empty wheelchair and store the result by pressing the TARE key.

The scale is now in NET weighing mode which is also indicated on the display.

The patient may now roll on the scale sitting in the wheelchair.

The weight displayed is the weight of the patient.

The scale identified the added weight. You may now use the scale for as many weighing

procedures and the stored value will always be deducted as long as the scale is not turned off.

050100-Rev000-M50612

Weighing