ADE M70611 Operating Manual - Page 2

Browse online or download pdf Operating Manual for Scales ADE M70611. ADE M70611 5 pages. Electronic lifter scale

Your ADE scale is a quality product. In order to achieve best possible results please follow strictly the
instructions of this Operating Manual:
Check carton contents
Electronic Lifter Scale
2 Safety hooks (1 snap link, 1 stable S-hook)
3 x AAA Batteries
Operating Manual
Insert batteries
-
Open the battery compartment on the backside of the scale by sliding the lid aside.
-
Insert 3 x AAA Batteries respecting the pole markings.
-
Shut the battery compartment carefully and make sure it is completely closed.
-
In case display shows 'LO' batteries are flat and need to be replaced.
Installation of scale to a suitable patient lifter
Insert the snap link into the upper the S-hook into the lower suspension of the scale.
-
Remove the suspension yoke of the patient lifter and replace this by using the upper
suspension eye of the scale to combine lifting arm and scale.
-
Slide the suspension respectively the carrying equipment of the patient lifter carefully into the
S-hook.
Display symbols and function keys
Underneath the display you are finding the following 3 keys:
-
ON/OFF to start the scale and turn it off.
-
ZERO/TARE to set the scale back to zero.
-
UNIT key to change the weighing mode. You have the option to weigh either in kg or lb.
Weighing
To achieve a reliable result make sure the scale in always in vertical position. The S-hook must not yet
be loaded by any weight.
Now press the ON/OFF key to start the scale. After a short function test the measuring becomes
stable, the scale found its zero position and enters the '0.00' kg mode.
1
Installation and use of scale
060100-Rev000-M70611