Great Life Healthcare UTS User Manual - Page 5

Browse online or download pdf User Manual for Medical Equipment Great Life Healthcare UTS. Great Life Healthcare UTS 18 pages.

Print Page

5. SYSTEM CONTROL

Item Description

POWER Switch – Power On (Green LED), Standby (Amber LED)

AUTO Weight Detection function – Enabled by pressing the "Auto" button and will self-adjust the

comfort level according to patient's weight.

NOTE: The "AUTO" detection mode will be disabled when comfort level is manually adjusted. Press

"AUTO" again to re-activate the automatic weight detection when needed. It will detect around 10

minutes to achieve suggested comfort level based on patient's weight.

MODE – Cycle through Auto Firm (AF), Alternating (AL) and Static (ST) therapy modes by repeatedly

pressing the "Mode" button – the pump is set to alternating mode by default with "AL" display on

LED window. UTS is programmed to default back to alternating mode after 30 minutes of usage.

Auto Firm (AF)- Fast inflates the mattress to maximum pressure in static mode to perform nursing

procedures. It is programmed to return to alternating mode after 30 minutes of usage by default.

Alternating (AL) - To inflate mattress in alternating mode

Static (ST) - To inflate the mattress to a static surface. The pump will default back to alternating

mode after 30 minutes.

LEVEL – Allows for manual adjustment, by repeatedly pressing "LEVEL" button to accommodate an

individual's comfort if needed. Default manual setting will be the level detected during "Auto" mode,

or at Level 02 if Auto detection is incomplete. Display of "LEVEL" will automatically go back to

"MODE" when not in operation for 10 seconds.

Alarm Codes Display Window - "PF" stands for Power Failure, displayed in LED window with an

audio alarm to indicate a power outage situation. "LP" stands for Low Pressure, where the system

will alert user with a visual alarm displayed in LED display window, and an audible alarm triggered 5

minutes after visual alarm. (Check)

Lock/Unlock/ Alarm Mute Button - Lock/Unlock button allows user to manually lock (3 seconds)

/unlock (3 seconds) the control panel to safeguard against any undesired/accidental changes to the

settings. Control panel will auto lock when system is not in operation for 5 minutes.

Alarm Mute – Press to mute the audio alarm. The alarm will re-activate after 20 minutes if the

problem is not resolved. (Check)