ADEMCO ADEMCO VISTA-15PSIA Programming Manual - Page 7
Browse online or download pdf Programming Manual for Security System ADEMCO ADEMCO VISTA-15PSIA. ADEMCO ADEMCO VISTA-15PSIA 17 pages. Ademco vista series security system
Also for ADEMCO ADEMCO VISTA-15PSIA: Quick Installation Manual (2 pages), User Manual (20 pages), Quick Installation Manual (2 pages), Quick Installation Manual (2 pages), Quick Manual (2 pages)
Print Page
Configurable Zone Types Worksheets
Configurable zone types 90 and 91 can be programmed via downloader software or from a keypad using data fields*182-
*185. Configurable zone types 92 and 93 (VISTA-20P only) can only be programmed using the downloader software.
Programming Configurable Zone Type options involves making 10 entries in data field *182 for zone type 90 and field *184 for
zone type 91, where each entry represents the sum of the values of the various options shown in the tables below. Use fields
*183 and *185 to program Contact ID report codes for these zone types.
ENTRY 1
(See note 5 for RF zones)
Response when system disarmed and zone is:
Intact EOL
Open
RF zone normal
RF zone N/A
0 = normal
0 = normal
1 = alarm
4 = alarm
2 = trouble
8 = trouble
3 = fault
12 = fault
Entry 1 = EOL + Open
ENTRY 3
(See note 5 for RF zones)
Response when armed STAY and zone is:
Intact EOL
Open
RF zone normal
RF zone N/A
0 = normal
0 = normal
1 = alarm
4 = alarm
2 = trouble
8 = trouble
3 = fault
12 = fault
Entry 3 = EOL + Open
ENTRY 5
(See note 5 for RF zones)
Response when armed AWAY and zone is:
Intact EOL
Open
RF zone normal
RF zone N/A
0 = normal
0 = normal
1 = alarm
4 = alarm
2 = trouble
8 = trouble
3 = fault
12 = fault
Entry 5 = EOL + Open
ENTRY 7
Display Faults
Power Reset/
Verification
0 = show alarms
0 = no
when armed
4 = power reset
& disarmed
after fault
1 = don't show
(by code + OFF)
12 = verification
alarms when
(see zone
armed
(show
type 16)
alarms, trbles,
faults when
disarmed)
3 = never show
any alarms,
trbles, faults
Entry 7 = fault display + power
reset/verification
ENTRY 9
Alarm Sounds
Use Bell
Timeout
0 = none
0 = no
1 = steady
4 = yes
keypad
2 = steady bell
see fields *32,
and keypad
*33
3 = pulsing bell
and keypad
Entry 9 = alarm sounds + bell timeout + fire zone
ENTRY 2
(See note 5 for RF zones)
Auto
Restore
Shorted
RF zn off-normal
0 = normal
0 = no
1 = alarm
4 = yes
2 = trouble
3 = fault
see note 6
Entry 2 = Short + auto restore + vent zone
ENTRY 4
(See note 5 for RF zones)
Byp. when
disarmed
Shorted
RF zn off-normal
0 = normal
0 = no
1 = alarm
4 = yes
2 = trouble
3 = fault
see note 6
Entry 4 = Short + byp. disarmed + byp. armed
ENTRY 6
(See note 5 for RF zones)
Dial Delay
(see field *50)
Shorted
RF zn off-normal
0 = normal
0 = no
1 = alarm
4 = use delay
2 = trouble
3 = fault
see note 6
Entry 6 = Short + dial delay + fault delay
ENTRY 8
Use Entry
Use Exit
Delay 1/2
Delay
0 = no
0 = no
1 = delay 1
4 = use exit
2 = delay 2
delay
Entry 8 = entry delay 1/entry delay 2 + exit delay +
interior zone type
ENTRY 10
Respond as
Trouble
Fire Zone
Sounds
0 = no
0 = none
8 = yes
1 = periodic
beep
see zone type
2 = trouble
09; see note 4
beeps
Entry 10 = trouble sounds + chime
Entry Zone Type 90
Vent Zone
1
0 = no
2
8 = yes
3
4
5
6
7
8
Byp. when
9
armed
10
To calculate the value for each entry:
0 = no
Simply add the values of the selected options
8 = yes
in each of the entry's columns (one option per
column). For example, to program Entry 2 for
"alarm response to short," "auto restore on,"
but not a "vent zone," enter 5 ("1" for alarm
short + "4" for auto restore yes + "0" for vent
zone no).
Fault Delay
(see field *87)
0 = no
8 = use delay
see note 1
NOTES:
Respond as
1. Do not use the "fault delay" option with a
Interior Type
configurable zone type if it is set for an
0 = no
entry or exit delay, otherwise
8 = yes
unpredictable results may occur.
2. To create an interior type zone, select
see note 2
"respond as interior zone type" (entry 8,
interior type = yes), and set zone
response to "fault" in entries 3-4 to ensure
fault displays; do not set as "normal,"
"alarm," or "trouble."
3. Do not set fire zones to respond as a
"fault" (entries 1-6), otherwise faults will
not display unless the [∗] key is pressed.
4. 4219/4229 modules must use EOLRs or
unpredictable results may occur.
5. RF Zones: The "open" option in entries 1,
3, and 5 is not applicable for RF zones.
Chime when
Use the "intact EOL" option for normal RF
Chime Mode On
zone conditions and "shorted" for off-
0 = no
normal RF zone conditions.
4 = yes
6. a. Zone-Doubling/Double-Balanced: A
b. For double-balanced zones, this entry
c. For zone-doubled zones, both zones
– 7 –
Entries for Fields *182 and *184
Zone Type 91
(field *182)
(field *184)
INTACT
OPEN
SHORTED
EOL
ZONE-003-V0
Zone Conditions Represented
in Entries 1-6
short on either zone of a zone-doubled
pair or on a double-balanced zone
causes a tamper condition.
must be "0."
of the doubled pair must be assigned
the same response to a short.