ADEMCO StreetSmart Code Encryptor II WELR Survival Manual
Browse online or download pdf Survival Manual for Security System ADEMCO StreetSmart Code Encryptor II WELR. ADEMCO StreetSmart Code Encryptor II WELR 1 pages. Security universal add-on keyfob system
Print Page
Model Numbers:
F
CE2Y = 3 button "Yellow"
F
CE2R = 3 button "Red"
F
CE2YLX = 4 button "Yellow"
F
CE2RLX = 4 button "Red"
F
WELY = 1 button panic "Yellow"
F
WELR = 1 button panic "Red"
Panel Compatibility:
F
"Yellow"
Ademco
Ø
DSC
Ø
Ø
Napco 100E
Ø
Moose
Caddx 8600E/8980E
Ø
F
"Red"
Ø
FBII
Napco Express/Gemini
Ø
Napco P400/P600/P800
Ø
Caddx NX6/NX8
Ø
FEATURES
F
Functions: Away, Stay, Disarm,
Garage door opener, Panic.
F
7 remotes per receiver
F
1 receiver per panel
F
Status LED
F
Universal unit
– Works on multiple manufacturers panels.
Code-Encryptor II
Street-Smart security universal add-on keyfob system
(addr 03 or 17)
(addr 02)
(addr 04)
(addr 08)
Setup made easy:
1) Connect CE2 to panel keypad bus.
(With panel powered up)
2) After power up CE2, LED will
blink once, then flash to indicate the
type of control that was recognized.
3) Program the user code:
Ø
Press and hold the button on the
receiver.
Ø
The LED will come on for 3
seconds.
Ø
After the LED turns off, release
the button.
Ø
The LED will begin flashing.
Ø
Slowly and firmly enter the 4-
digit user code at the system
keypad.
Ø The LED should stop flashing.
Add more remotes:
1) Key 78738 on the system
keypad.
The system will arm stay.
2) Press the #1 button on the remote
until the system disarms
Note: the remotes included with the CE2 are
enrolled from the factory.
Delete all remotes:
Key 76278 on the system keypad. The
keypad should beep or flash the lights.