Automated Logic ZS Series User Manual - Page 10

Browse online or download pdf User Manual for Accessories Automated Logic ZS Series. Automated Logic ZS Series 16 pages.

Print Page

Force to an unoccupied state

If allowed by the control program, press and hold the

unoccupied state.

Press the

button again to cancel the force to unoccupied and return control to the schedule.

NOTE You may see the energy-saving icon

To lock the sensor buttons

Simultaneously press and hold the 2 buttons shown below for 5 seconds to lock the sensor's buttons.

The display shows a lock icon to indicate the locked state.

Press and hold the 2 buttons again for 5 seconds to unlock the buttons.

NOTE If you press the

instead of locking the buttons. But, if you press the

If the display shows a value other than a zone temperature setpoint with

value is editable from the sensor.

Press the

Wait until the display returns to the home screen before you press any other buttons.

NOTE If the control program specifies that the value is not editable, you will see

ZS Sensors

Rev. 4/27/2015

button slightly before the

button to adjust the value.

ALC Proprietary and Confidential

button for 3 seconds to force the zone to an

if the control program specifies it.

button, the sensor will go into an override state

button first, the buttons will lock.

to the right of it, the

without arrows.