ADEMCO VISTA-15P Programming Manual - Page 6

Browse online or download pdf Programming Manual for Security System ADEMCO VISTA-15P. ADEMCO VISTA-15P 17 pages. Programming auto arming and disarming schedules
Also for ADEMCO VISTA-15P: Quick Installation Manual (2 pages), Programming Manual (17 pages), User Manual (20 pages), Quick Installation Manual (2 pages), Quick Installation Manual (2 pages), Programming Manual (2 pages), Quick Manual (2 pages)

Print Page
ADEMCO VISTA-15P Programming Manual
DOWNLOAD INFORMATION ( ✱ 94, ✱ 95)
✱ 94
DOWNLOAD PHONE No.
✱ 95
RING COUNT FOR DOWNLOADING
PAGER OPTIONS 160-172
✱ 160 PAGER 1 PHONE No.
✱ 161 PAGER 1 CHARACTERS
✱ 162 PAGER 1 REPORTING OPTIONS
✱ 163 PAGER 2 PHONE No.
✱ 164 PAGER 2 CHARACTERS
✱ 165 PAGER 2 REPORTING OPTIONS
✱ 166 PAGER 3 PHONE No.
✱ 167 PAGER 3 CHARACTERS
✱ 168 PAGER 3 REPORTING OPTIONS
✱ 169 PAGER 4 PHONE No.
✱ 170 PAGER 4 CHARACTERS
✱ 171 PAGER 4 REPORTING OPTIONS
✱ 172 PAGER DELAY OPTION FOR ALARMS

REPORTING OPTIONS

✱ 174 CLEAN ME REPORTING OPTIONS
(for ESL smoke detectors)
✱ 177 DEVICE DURATION 1, 2
(used in *80 Menu mode-Device Actions 5/6)
|
|
|
|
|
|
|
Enter up to 20 digits, 0–9; #+11 for ' ✱ '; #+12 for '#'; #+13 for a 2-second pause. Do not fill unused
spaces. If fewer than 20 digits, exit field by pressing ✱ (and press 95, if entering next field). To clear
entries from field, press ✱ 94 ✱ . UL: downloading may be performed only if a technician is at the site.
[15]
NOTE: Do not enter "0" if using
4285/4286 Phone Module.
|
|
|
|
|
|
|
Enter up to 20 digits. 0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.
|
|
|
Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.
Part. 1 Part. 2 common
[0,0,0]
|
|
|
|
|
|
|
Enter up to 20 digits. 0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.
|
|
|
Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.
Part. 1 Part. 2 common
|
|
|
|
|
|
|
|
Enter up to 20 digits. 0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.
|
|
|
|
Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.
0,0,0]
Part. 1 Part. 2 common
|
|
|
|
|
|
|
|
Enter up to 20 digits. 0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.
|
|
|
|
Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.
[0,0,0]
Part. 1 Part. 2 common
[3]
[0]
[0] [0]
1
2
– 6 –
|
|
|
|
|
|
|
|
0 = Disable Station Initiated Download;
1–14 = number of rings (1–9, # +10 =10, # +11 =11,
# +12 =12, # +13 =13, # +14 =14);
15 = answering machine defeat (# +15 =15).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For each partition, select from the following options:
0 = no reports sent
1 = Open/closes all users
4 = All alarms and troubles
5 = All alarms / troubles, and open/closes for all users
12 = Alarms / troubles for zones entered in zone list 9
13 = Alarms / troubles for zones entered in zone list 9,
and open\closes for all users
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
See field *162 for reporting options. Select for each
[0,0,0]
partition (use zone list 10 if using options 12 or 13).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
See field *162 for reporting options. Select for each
partition (use zone list 11 if using options 12 or 13).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
See field *162 for reporting options. Select for each
partition (use zone list 12 if using options 12 or 13).
0 = none, 1 = 1 minute, 2 = 2 minutes, 3 = 3 minutes
This delay is for ALL pagers in the system.
NOTE: The delay does not reset for new alarms
occurring while an existing pager delay is in progress.
0 = disable; 1 = Clean Me signal reports;
Note: If Clean Me is enabled, you must enter "3" in
field ✱56 programming for zone 1 response time.
0 = 15 seconds
1 = 30 seconds
2 = 45 seconds
3 = 60 seconds
4 = 90 seconds
5 = 2 minutes
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 = 2-1/2 min
#+11 = 7 min
7 = 3 min
#+12 = 8 min
8 = 4 min
#+13 = 10 min
9 = 5 min
#+14 = 12 min
#+10 = 6 min
#+15 = 15 min