ADEMCO VISTA-20PS Programming Manual - Page 6
Browse online or download pdf Programming Manual for Security System ADEMCO VISTA-20PS. ADEMCO VISTA-20PS 17 pages.
Print Page
✱ 92
PHONE LINE MONITOR ENABLE
UL: see Inst. Instructions for requirements
✱ 93
No. OF REPORTS IN ARMED PERIOD
PER ZONE (Swinger Suppression)
DOWNLOAD INFORMATION ( ✱ 94, ✱ 95)
✱ 94
DOWNLOAD PHONE No.
✱ 95
RING COUNT FOR DOWNLOADING
∗ 96, ∗97
INITIALIZE/RESET DEFAULTS
∗ 98, *99
EXIT COMMANDS
PAGER OPTIONS (✱160- ✱172)
✱ 160 PAGER 1 PHONE No.
✱ 161 PAGER 1 CHARACTERS
✱ 162 PAGER 1 REPORTING OPTIONS
✱ 163 PAGER 2 PHONE No.
✱ 164 PAGER 2 CHARACTERS
✱ 165 PAGER 2 REPORTING OPTIONS
✱ 166 PAGER 3 PHONE No.
✱ 167 PAGER 3 CHARACTERS
✱ 168 PAGER 3 REPORTING OPTIONS
✱ 169 PAGER 4 PHONE No.
✱ 170 PAGER 4 CHARACTERS
✱ 171 PAGER 4 REPORTING OPTIONS
✱ 172 PAGER DELAY OPTION FOR ALARMS
www.PDF-Zoo.com
[0,0]
1
2
NOTE: Output Device must
either be programmed to be
STOPPED in field ✱80 or
STOPPED by Code + # + 8 +
output number.
[1]
|
|
|
|
|
|
|
Enter up to 20 digits, 0–9; #+11 for ' ✱ '; #+12 for '#'; #+13 for a 2-second pause. Do not fill unused
spaces. If fewer than 20 digits, exit field by pressing ✱ . To clear entries from field, press ✱ 94 ✱ .
UL: downloading may be performed only if a technician is at the site.
[15]
NOTE: Do not enter "0" if using
4285/4286 Phone Module.
These are commands, not data fields. See page 2.
These are commands, not data fields. See page 2.
|
|
|
|
|
|
|
Enter up to 20 digits. 0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.
|
|
|
|
Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.
Part. 1 Part. 2 common
[0,0,0]
|
|
|
|
|
|
|
Enter up to 20 digits. 0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.
|
|
|
|
Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.
[0,0,0]
Part. 1 Part. 2 common
|
|
|
|
|
|
|
|
|
Enter up to 20 digits. 0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.
|
|
|
|
Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.
0,0,0]
Part. 1 Part. 2 common
|
|
|
|
|
|
|
|
|
Enter up to 20 digits. 0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.
|
|
|
|
Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = ' ✱ '; #+12 = '#'; #+13 = 2-second pause.
[0,0,0]
Part. 1 Part. 2 common
[3]
– 6 –
Entry 1:: 0 = disabled, 1-15 = 1 min - 15 min
(#+10 = 10 min; #+11 = 11 min; #+12 = 12 min;
#+13 = 13 min; #+14 = 14 min; #+15 = 15 min)
Entry 2:
0 = Keypad display when line is faulted
1 = Keypad display plus keypad trouble sound
2 = Same as "1", plus programmed output device
STARTS. If either partition is armed, external
sounder activates also.
0 = Unlimited Reports; 1 = 1 report; 2 = 2 reports
UL: must be "0"
|
|
|
|
|
|
|
|
|
0 = Disable Station Initiated Download;
1–14 = number of rings (1–9, # +10 =10, # +11 =11,
# +12 =12, # +13 =13, # +14 =14);
15 = answering machine defeat (# +15 =15).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For each partition, select from the following options:
0 = no reports sent
1 = Open/closes all users
4 = All alarms and troubles
5 = All alarms / troubles, and open/closes for all users
12 = Alarms / troubles for zones entered in zone list 9
13 = Alarms / troubles for zones entered in zone list 9,
and open/closes for all users
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
See field *162 for reporting options. Select for each
partition (use zone list 10 if using options 12 or 13).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
See field *162 for reporting options. Select for each
partition (use zone list 11 if using options 12 or 13).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
See field *162 for reporting options. Select for each
partition (use zone list 12 if using options 12 or 13).
0 = none, 1 = 1 minute, 2 = 2 minutes, 3 = 3 minutes
This delay is for ALL pagers in the system.
NOTE: The delay does not reset for new alarms
occurring while an existing pager delay is in progress.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|