AFG 2.0AS Assembly and Assembly And User's Manual - Page 4

Browse online or download pdf Assembly And User's Manual for Home Gym AFG 2.0AS Assembly and. AFG 2.0AS Assembly and 15 pages. Afg series
Also for AFG 2.0AS Assembly and: Assembly And User's Manual (16 pages)

Print Page

AFG 2.0AS Assembly and Assembly And User's Manual

CABLE "A"

LEFT SUPPORT FRAME

LAT PULLDOWN BAR

LARGE "O" RING

CENTER SUPPORT FRAME

WATER BOTTLE HOLDER

CABLE "B"

SEAT HEAD PAD

HANDLES

RADIAL ARM ADJUSTMENT PIN

SEAT BACK PAD

SEAT BACK ADJUSTMENT KNOB

BICEP CURL BAR

SEAT BOTTOM PAD

SEAT WELDMENT

LEG EXTENSION/CURL DOWN TUBE

ADJUSTMENT BAR

SEAT HEIGHT ADJUSTMENT KNOB

FOAM ROLLERS

ADJUSTABLE FOOTPLATE

TOOLS INCLUDED

19 mm Flat Wrench

13 mm/17 mm Flat Wrench

PARTS INCLUDED

1 Bayonet

1 Bicep Curl Bar

1 Seat Back Pad

1 Base Frame

1 Left Support Frame

1 Right Support Frame

1 Seat Back Adjustment Bar

1 Radial Arm Assembly

1 Exercise Flipbook

2 Seat Adjustment Pins

1 Leg Roller Support Tube

1 Water Bottle Holder

1 Seat Bottom Adjustment Bar

If you have questions or if there are any missing parts, contact Customer Tech Support.

Contact information is located on the back panel of this manual.

For a complete exploded diagram, visit us at www.advancedﬁtnessgroup.com

2.0AS_Rev.1.5.indd 6-7

UPPER PULLEY ASSEMBLY

DUAL FLOATING PULLEY BRACKET

RADIAL ARM ASSEMBLY

WEIGHT SELECTION PIN

RIGHT SUPPORT FRAME

SINGLE FLOATING PULLEY BRACKET

SEAT ASSEMBLY SAFETY PIN

4 mm Allen Wrench

6 mm Allen Wrench

5 mm Allen Wrench

1 Center Support Frame

2 Single Floating Pulley Bracket

1 Seat Weldment

1 Upper Pulley Assembly

2 Weight Shrouds

1 Seat Bottom Pad

2 Guide Rods

1 Nylon Ankle Strap

1 Weight Selection Pin

2 Handles

1 5 lb. Increment Weight

1 Lat Pulldown Bar

1 Dual Floating Pulley Bracket

10 Hardware Bags

1 Set Of Weight Plate Decals

2 Foam Rollers

1 Center Connection Tube

1 Seat Head Pad

1 Lower Connection Tube

2 Side Connection Tubes

1 Lower Pulley Bracket

1 Upper Mounting Bracket

2 Upgrade Spacers

1 Lower Mounting Bracket

2 Accent Pieces

PRE- ASSEMBLY

NOTE:

During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before

completely tightening any ONE bolt.

WEIGHT SHROUD

NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike

grease is recommended.

CABLE "C"

GUIDE ROD

ASSEMBLY STEP 1

ACCENT PIECE

BAYONET

HARDWARE BAG 1 CONTENTS :

FLAT WASHER (C)

Qty: 4

BASE FRAME

CABLE "D"

CENTER

SUPPORT FRAME

BOLT (A)

FLAT

WASHER (C)

BOLT (A)

BOLT (B)

75 mm

95 mm

Qty: 2

Qty: 4

ARC WASHER (D)

NYLON

Qty: 8

NUT (E)

Qty: 6

LEFT SUPPORT FRAME

RIGHT SUPPORT FRAME

BOLT (B)

ARC WASHER (D)

NYLON NUT (E)

BASE FRAME

LOWER PULLEY BRACKET

FLAT WASHER (C)

NYLON NUT (E)

Place BASE FRAME

on floor in desired

location.

Open HARDWARE BAG

Attach RIGHT

SUPPORT FRAME to

right side of BASE

FRAME using 2 BOLTS

(B), 4 ARC WASHERS

(D) and 2 NYLON NUTS

(E).

Attach LEFT SUPPORT

FRAME to left side of

BASE FRAME using

2 BOLTS (B), 4 ARC

WASHERS (D) and 2

NYLON NUTS (E).

Attach CENTER

SUPPORT FRAME

and LOWER PULLEY

BRACKET to BASE

FRAME using 2 BOLTS

(A), 4 FLAT WASHERS

(E).

NOTE: Ensure that

the LOWER PULLEY

BRACKET is positioned

as shown in diagram.

9/23/08 10:14:12 AM