AutomationDirect Productivity2000 P2-HSI Manual

Browse online or download pdf Manual for Control Unit AutomationDirect Productivity2000 P2-HSI. AutomationDirect Productivity2000 P2-HSI 8 pages. High-speed pulse input

Print Page

AutomationDirect Productivity2000 P2-HSI Manual

WARNING:

To minimize the risk of potential safety problems, you

should follow all applicable local and national codes that regulate the

installation and operation of your equipment. These codes vary from

area to area and it is your responsibility to determine which codes

should be followed, and to verify that the equipment, installation, and

operation are in compliance with the latest revision of these codes.

Equipment damage or serious injury to personnel can result from

the failure to follow all applicable codes and standards. We do not

guarantee the products described in this publication are suitable for

your particular application, nor do we assume any responsibility for

your product design, installation, or operation.

If you have any questions concerning the installation or operation

of this equipment, or if you need additional information, please call

Technical Support at 770-844-4200.

This publication is based on information that was available at the

time it was printed. At AutomationDirect.com

improve our products and services, so we reserve the right to make

changes to the products and/or publications at any time without notice

and without any obligation. This publication may also discuss features

that may not be available in certain revisions of the product.

Connector Specifications

Connector Type

IDC style header with latch, Omron XG4A-4034

Number of Pins

40 point

Pitch

0.1 in (2.54 mm)

QR Code

Use any QR Code reader application to

display the module's product insert.

Document Name

P2-HSI-DS

Sales 800-633-0405

we constantly strive to

Edition/Revision

Date

4th Ed.

5/14/2020

P2-HSI High-Speed Pulse Input

The P2-HSI High-Speed Input Module provides

differential (line receiver, 5V max) and single

ended (5-24 V) inputs that accept up to 1MHz

of pulse/direction and quadrature signals on

each of the two independent input channels.

Additionally, four 5-24 VDC general purpose

high-speed inputs and four general purpose

5-24 VDC, 0.5A outputs are included for use

with any Productivity2000 System.

Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Connector Specifications . . . . . . . . . . . . . . . . . . . . . 1

QR Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

General Specifications . . . . . . . . . . . . . . . . . . . . . . 2

Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Status Output Specifications . . . . . . . . . . . . . . . . . . 2

Power Specifications . . . . . . . . . . . . . . . . . . . . . . . . 2

Single Ended (5-24 V) Input Specifications . . . . . . 3

Differential (5V) Input Specifications . . . . . . . . . . . . 3

Hot Swap Information . . . . . . . . . . . . . . . . . . . . . . . 3

Module Installation . . . . . . . . . . . . . . . . . . . . . . . . . 4

Wiring Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Frequency Measurement Details . . . . . . . . . . . . . . 5

5V Encoder Inputs Wiring Diagram . . . . . . . . . . . . . 6

24V Encoder Inputs Wiring Diagram . . . . . . . . . . . . 6

Status Inputs Wiring Diagram . . . . . . . . . . . . . . . . . 7

Status Outputs Wiring Diagram . . . . . . . . . . . . . . . . 7

Sinking I/O Wiring Diagram . . . . . . . . . . . . . . . . . . . 8

Sourcing I/O Wiring Diagram . . . . . . . . . . . . . . . . . 8

Warranty: Thirty-day money-back guarantee. Two-year limited replacement.

(See www.productivity2000.com for details).