DBI SALA 2200425 User Instruction

Browse online or download pdf User Instruction for Security Sensors DBI SALA 2200425. DBI SALA 2200425 12 pages.

Print Page

User Instruction Manual

Vacuum Anchor

Horizontal Lifeline System

This manual is intended to be used as part of an

employee training program as required by OSHA.

WARNING: This product is part of a personal fall arrest system. The user must follow the manufacturer's instructions for

each component of the system. These instructions must be provided to the user of this equipment. The user must read

and understand these instructions before using this equipment. Manufacturer's instructions must be followed for proper

use and maintenance of this equipment. Alterations or misuse of this equipment, or failure to follow instructions, may result

in serious injury or death.

IMPORTANT: If you have questions on the use, care, or suitability of this equipment for your application, contact DBI/SALA.

IMPORTANT: Record the product identification information from the ID label in the inspection and maintenance log in

section 9.0 of this manual.

1.0 APPLICATION

1.1 PURPOSE: The Vacuum Anchor Horizontal Lifeline System is designed for use as an anchoring means for one or

two personal fall arrest systems. Use the Vacuum Anchor Horizontal Lifeline System where horizontal mobility and

fall protection are required. The system is used in conjunction with vacuum anchors.

1.2 LIMITATIONS: The following limits apply to the installation and use of the Vacuum Anchor Horizontal Lifeline

System. Other limitations may apply:

IMPORTANT: OSHA regulations state that horizontal lifelines shall be installed and used under the supervision of a

qualified person (see below for definition) as part of a complete personal fall arrest system that maintains a safety factor

of at least two.

Qualified Person: An individual with a recognized degree or professional certificate, and extensive knowledge and

experience in the subject field, who is capable of design, analysis, evaluation, and specification in the subject work,

project, or product. Refer to OSHA 1910.66, 1926.32, and 1926.502.

A. HORIZONTAL LIFELINE SPAN: The maximum span distance is 40 ft. (12.2 m) for a single span system. For

multiple span systems, the maximum span distance is 80 ft. (24.4 m) with a maximum subspan length of 40 ft

(12.2 m). The span length must be reduced when clearance is limited. See section 3.0 for clearance information.

B. ANCHORAGE STRUCTURE: The surface to which the Vacuum Anchors are attached must meet the limitations

and strength requirements specified in instruction 5902157.

C. SYSTEM CAPACITY: The maximum capacity of the Vacuum Anchor Horizontal Lifeline is two persons. The

maximum weight of each person, including tools and clothing, is 310 lbs. (141 kg).

Instructions for the following series products:

Vacuum Anchor HLL System

(See back page for specific model numbers.)